chdkptp - alternative ptp client - page 104 - General Discussion and Assistance

reyalp

11900

Re: chdkptp - alternative ptp client

« Reply #1030 on: 02 / April / 2018, 12:48:14 »

Advertisements

Quote from: Bluestone_7 on 02 / April / 2018, 09:09:47

My Windows 7 PC (8gb RAM) will clear the RAM if chdkptp exceeds 900 mb of memory. It shot 1500 pictures (about 6gb) without any problem.
My RPi3 (1gb RAM) with Raspian does not clear the RAM, so it crashes. The following pictures are saved to the camera SD card (as you mentioned in https://chdk.setepontos.com/index.php?topic=13386.msg136688#msg136688). Sometimes the RPi will clear the RAM once or maybe twice, but it crashes always. My best attempt was about 800 pictures.

Thanks for the report. I should have a fix for this later today.

Logged

Don't forget what the H stands for.

reyalp

11900

Re: chdkptp - alternative ptp client

« Reply #1031 on: 02 / April / 2018, 16:19:24 »

@Bluestone_7
I checked in a workaround for the remoteshoot memory issues in chdkptp r835. Update to the latest lua files to use it.

Logged

Don't forget what the H stands for.

Bluestone_7

Re: chdkptp - alternative ptp client

« Reply #1032 on: 04 / April / 2018, 15:57:29 »

Hi reyalp,

thank you very much.
I just tried it and it works perfectly.

Logged

Thailandian

Re: chdkptp - alternative ptp client

« Reply #1033 on: 29 / April / 2018, 11:43:49 »

As discussed in this thread I was able to get CHDK PTP working on OpenSuse Leap 42 using a slight modification of the instructions for Fedora 27.

The only difference is in the line to insert below. From the install instructions for Fedora 27:

Quote

edit /etc/udev/rules.d/40-libgphoto2.rules, immediately below the line
Code: [Select]
ENV{ID_USB_INTERFACES}=="", IMPORT{program}="usb_id --export %%p"Add
Code: [Select]
ENV{ID_USB_INTERFACES}=="*:060101:*", ATTRS{idVendor}=="04a9", MODE="0664", GOTO="libgphoto2_rules_end"

For OpenSuse I inserted the same line below:

Code: [Select]

ENV{ID_USB_INTERFACES}=="", IMPORT{builtin}="usb_id"
Also as discussed I was not able to open an Assembla account, so I'm providing feedback here just in case other OpenSusers come up against the same problem.

Logged

reyalp

11900

Re: chdkptp - alternative ptp client

« Reply #1034 on: 29 / April / 2018, 15:57:04 »

Quote from: Thailandian on 29 / April / 2018, 11:43:49

As discussed in this thread I was able to get CHDK PTP working on OpenSuse Leap 42 using a slight modification of the instructions for Fedora 27.

Thanks for the note. I'm not sure how much distro specific detail it's worth including, but it's good to have another data point.

I moved the ixus240 related post back to the other thread: https://chdk.setepontos.com/index.php?topic=13416.10

Logged

Don't forget what the H stands for.

reyalp

11900

Re: chdkptp - alternative ptp client

« Reply #1035 on: 22 / September / 2018, 17:00:23 »

Discussion about set_zoom split to https://chdk.setepontos.com/index.php?topic=13540.msg138182

Unicode related discussion quoted below to keep in this thread

Quote from: nod5 on 18 / September / 2018, 16:49:46

2. question about special (not A-Z) characters after the path command when in rsint mode

What characters are supported after the path command? Could support be added for characters such as the german ü ?

For example if we start rsint mode and then enter the commands
Code: [Select]
path C:/1ü2/1 sone would expect the file
Code: [Select]
C:/1ü2/1.jpg
But in my tests the image is instead saved as
Code: [Select]
C:/12/1.jpg
where the character between 1 and 2 is https://unicode-table.com/en/search/?q=%C2%81 , a character not visible in File Explorer in Windows 10

Quote from: reyalp on 19 / September / 2018, 17:35:12

Unfortunately, chdkptp currently isn't unicode aware at all, so I'd recommend sticking to straight ANSI for now. Maybe I can fix this in the future.

Quote from: reyalp on 20 / September / 2018, 13:44:57

Quote
Ok, I'll make users stick to A-Z 0-9 Space in paths for now.
You can allow other ASCII symbols if you want (_-+= etc), excluding any the OS disallows of course.

Spaces may be a problem in some contexts, but as long as you've tested that it works it should be fine. For most normal chdkptp commands (download, rs etc), spaces would need to be quoted, but rsint has it's own parsing.

Logged

Don't forget what the H stands for.