SX520HS Porting thread.

Garrett

11

Re: SX520HS Porting thread.

« Reply #200 on: 07 / April / 2017, 06:41:35 »

Advertisements

Quote from: wobelaar on 31 / March / 2017, 08:21:32

Can't you just select a white balance in Raw Therapee?

Yes, but with these presets the colours are quite not accurate, that's obvious even for me (I'm partially colorblind, not totally), so that's still not a solution.

Logged

blackhole

942
A590IS 101b

Re: SX520HS Porting thread.

« Reply #201 on: 07 / April / 2017, 08:29:04 »

Quote

Yes, but with these presets the colours are quite not accurate, that's obvious even for me (I'm partially colorblind, not totally), so that's still not a solution.

If you want I can make a few test versions with a different color matrix, maybe you will find something more suitable for you. None of them will not have the same colors as JPEG.

Logged

http://astrofoto.pondi.hr

Garrett

11

Re: SX520HS Porting thread.

« Reply #202 on: 10 / April / 2017, 04:46:53 »

Quote from: blackhole on 07 / April / 2017, 08:29:04

If you want I can make a few test versions with a different color matrix

Yep, that would be great. I was thinking about purchasing something like this: http://xritephoto.com/colorchecker-passport-photo - I heard it can help with the issue I have, but it is even more expensive than my camera.

Logged

momo

18

Re: SX520HS Porting thread.

« Reply #203 on: 10 / April / 2017, 09:26:03 »

Quote from: Garrett on 10 / April / 2017, 04:46:53

I was thinking about purchasing something like this: http://xritephoto.com/colorchecker-passport-photo - I heard it can help with the issue I have, but it is even more expensive than my camera.

Wolf Faust offers inexpensive and usable reflective color targets ( http://www.targets.coloraid.de/ ). Problem is, one needs to write some code to do color calibration; I’m not aware of any ready-made software. However, one can ask Dave Coffin (dcraw, https://www.cybercom.net/~dcoffin/dcraw/ ). He is familiar with Wolf’s targets and used to be quite cooperative. The added advantage is that the camera will then be included in dcraw.

Logged

Heitor

6
sx520hs 100c

Re: SX520HS Porting thread.

« Reply #204 on: 28 / August / 2020, 14:45:10 »

Hello CHDK team,

Is it possible to address the <alt> button to some of these two ~~useless~~ framing assist buttons aside the camera?I think it's only permitted to use playback, trash can and brecketting buttons.

Thank you for the awesome job you do.

canon_powershot_sx520hs_left_ndtv.jpg (45.04 kB, 635x476 - viewed 54 times.)

Logged

blackhole

942
A590IS 101b

Re: SX520HS Porting thread.

« Reply #205 on: 29 / August / 2020, 03:14:00 »

Quote from: Heitor on 28 / August / 2020, 14:45:10

Hello CHDK team,

Is it possible to address the <alt> button to some of these two ~~useless~~ framing assist buttons aside the camera?I think it's only permitted to use playback, trash can and brecketting buttons.

Thank you for the awesome job you do.

It can be done, but I don't know what version of the firmware your camera has.

Logged

http://astrofoto.pondi.hr

Heitor

6
sx520hs 100c

Re: SX520HS Porting thread.

« Reply #206 on: 30 / August / 2020, 15:35:36 »

100c

Thank you.

Logged

blackhole

942
A590IS 101b

Re: SX520HS Porting thread.

« Reply #207 on: 31 / August / 2020, 05:03:39 »

Quote from: Heitor on 30 / August / 2020, 15:35:36

100c

A custom version where the buttons on the lens barrel can be used as the <ALT> button.

sx520hs-100c-ALT-1.5.0-5560-full.zip (819.43 kB - downloaded 19 times.)

Logged

http://astrofoto.pondi.hr

Heitor

6
sx520hs 100c

Re: SX520HS Porting thread.

« Reply #208 on: 31 / August / 2020, 11:48:51 »

Thank you so much. I'm gonna test it and reply. I know it's been a long time since the last reply, but would be nice if it may be avaliable on trunk link. Maybe I'm not the only one with this demand.

Logged

Heitor

6
sx520hs 100c

Re: SX520HS Porting thread.

« Reply #209 on: 31 / August / 2020, 12:31:55 »

Works awesome, as expected. Thanks a lot!

Logged