Canon PowerShot A1200 - page 4 - DryOS Development - CHDK Forum
supplierdeeply

Canon PowerShot A1200

  • 137 Replies
  • 73837 Views
Re: Canon PowerShot A1200
« Reply #30 on: 01 / September / 2012, 02:37:29 »
Advertisements
thank you very much! I'll try it out as soon as possible and really looking forward to it...

Re: Canon PowerShot A1200
« Reply #31 on: 01 / September / 2012, 08:44:54 »
Thanks you so much waterwingz, i was happy to see a beta for the A1200. Unfortunately my cam is 1.00b. Any chance you can port for 1.00b?
This is the first report of a 1.00b.  There is 1.00a but nobody has expressed interest in CHDK for that camera.

I can look at the 1.00b at some point but first somebody needs to dump the firmware. 

Here's the information if you want to take that on :  http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Dumper
and post the results here.
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Canon PowerShot A1200
« Reply #32 on: 01 / September / 2012, 16:18:11 »
Beta6 : a1200-100c-1.1.0-beta6

This version allows you to change the <ALT> key from Playback to either Face or DISP.  As always, holding the ALT key down for more than 1/2 second will activate its original function.

This version also corrects the reported bugs when using subject distance overrides ( i.e. manual focus ) in single shot or bracketing modes.   

Notes on SD Override for the A1200

SD overrides will only work when the camera is in AFL mode ( auto focus lock ).   To activate AFL :

1) The camera must be in P mode (on the upper dial) rather than AUTO or SCN.
2) You must be in normal Canon shooting mode (not CHDK <ALT> mode)
3) Press the "left/flower" button after first "half pressing & holding" the shutter release button.

If you complete the above 3 steps correctly,  you should see the Canon software put the letters AFL on the upper right edge of the LCD.   At that point,  any active SD override settings will be active for the following exposures.


« Last Edit: 01 / September / 2012, 17:04:11 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Canon PowerShot A1200
« Reply #33 on: 02 / September / 2012, 01:48:02 »
Thanks you so much waterwingz, i was happy to see a beta for the A1200. Unfortunately my cam is 1.00b. Any chance you can port for 1.00b?
This is the first report of a 1.00b.  There is 1.00a but nobody has expressed interest in CHDK for that camera.

I can look at the 1.00b at some point but first somebody needs to dump the firmware. 

Here's the information if you want to take that on :  http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Dumper
and post the results here.

I did the firmware dump,i had no idea what i was doing but I'm good at following instructions so i think i got it. PRIMARY.BIN 7.93mb in size so i cant attach it here. Where should i upload it or email it? Thanks


*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: Canon PowerShot A1200
« Reply #34 on: 02 / September / 2012, 04:50:59 »
I did the firmware dump
Where should i upload it or email it?
Pls upload it to a file sharing service & post the link to the file here in the forum (or send me a PM with the link)...

Some free file hosting services:
* http://www.4shared.com/
* http://depositfiles.com/
* http://www.filedropper.com/
« Last Edit: 02 / September / 2012, 04:53:43 by fe50 »

Re: Canon PowerShot A1200
« Reply #35 on: 02 / September / 2012, 06:16:06 »
Here's the link to the A1200 1.00b firmware dump, hope it works.

http://www.4shared.com/file/g1CvCHc8/PRIMARY.html

*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: Canon PowerShot A1200
« Reply #36 on: 02 / September / 2012, 06:39:26 »
Thanks for the dump, photongraph !
Added the
  • A1200 1.00B
full 8MB dump (dumped with cBasic udumper) by photongraph from this forum post to the box.net/chdk repository.

Re: Canon PowerShot A1200
« Reply #37 on: 02 / September / 2012, 09:33:48 »
Here's the link to the A1200 1.00b firmware dump, hope it works.

http://www.4shared.com/file/g1CvCHc8/PRIMARY.html
Dump is good.  Enough differences between the 1.00B and 1.00C that it will require a new port.

Ported :   A1200    SD940   G10    Powershot N    G16


Re: Canon PowerShot A1200
« Reply #38 on: 02 / September / 2012, 10:43:13 »
Thanks fe50.

Thank you waterwingz for  taking a look at it. Sorry to hear that it will need a new port though...Hope you can work on it if you ever feel like it. I'll help where ever i can.

Re: Canon PowerShot A1200
« Reply #39 on: 02 / September / 2012, 11:12:23 »
Thank you waterwingz for  taking a look at it. Sorry to hear that it will need a new port though...Hope you can work on it if you ever feel like it. I'll help where ever i can.

Try this : a1200-100b-1.1.0-beta6
Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal