ELPH300HS aka IXUS220HS - Porting Thread - page 57 - DryOS Development - CHDK Forum supplierdeeply

ELPH300HS aka IXUS220HS - Porting Thread

  • 899 Replies
  • 343537 Views
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #560 on: 08 / January / 2012, 16:59:48 »
Advertisements
Can any one walk me through the process of getting CHDK files to work.

I added the primary.BIN file which I got from CHDK site for the 1.01g firmware for ELPH 300hs.

I finally got the firmware update menu to appear then pressed it and asked me if I want to update, I pressed yes, but then the camera turned off and it has been more than 10 min and the camera does not function or turn on unless I take the battery off and out it back on.

Can anyone exlpain the process of getting CHDK to work? I did everything that was mentioned.

Help please.

B

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #561 on: 08 / January / 2012, 17:25:12 »
baraasafaa, you've got the original firmware which is of no use to end users. The CHDK firmware is here:
http://www.box.com/s/qh1ots6bxvjogvzyaqal

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #562 on: 10 / January / 2012, 12:31:32 »
do you guys think there is any way to make the camera record 60fps at 720p? it can record 120fps at 480p although the quality is really low..

anybody? : - D

or better, if there is a way to modify the frame rate it records with?
« Last Edit: 10 / January / 2012, 16:06:51 by eXistenZ »

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #563 on: 14 / January / 2012, 16:44:01 »
I'm about to buy an Ixus 220 HS but before I do I'd like to check something.

Will CHDK allow me to do remote capture with programs such as gPhoto2 and Cam4you?  I think it should, but I can't find any definitive answer.

  Chris


Re: DNG profiles for ELPH300HS - IXUS220HS
« Reply #564 on: 15 / January / 2012, 11:08:29 »
Hi!

Thank you very much danistuta for creating lens profiles for this camera, works like a charm in my LR trial.

I have a newbie question for anyone who can help. I would like to convert the Lightroom lens profiles
to Aperture 3, but I haven't had any luck trying to find such guide.
Is it even at all possible to do this conversion ?

Kind regards,
Fredrik

I made this RAW profiles for this great compact camera.
In Windows 7, to use in Camera Raw and Lightroom unzip them in this directory:

C:\Users\"name user"\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0

I hope they are useful for all owners of this Canon!

Let me know!

Thanks.

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #565 on: 15 / January / 2012, 14:13:59 »
Hey guys, i've got a canon 220HS, clicked a pic, and it was resized on the email. I entered that into the "CameraVersion v1.3" and the version says 101A (But the camera is "Unknown")

does this mean it's 1.01 A,


Also am i able to use both the stock firmware and the CHDK on the same card, with the option to boot to a certain software?

*

Offline Sektor

  • *
  • 13
  • ixus220_elph300hs-101a
    • Grand Theft Media Press
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #566 on: 15 / January / 2012, 14:17:38 »
Yes it means 1.01A. CHDK doesn't actually write to firmware, so you can go back to original just by deleting CHDK from your SD card, using another SD card or moving the lock switch on your SD card to the unlocked position.
« Last Edit: 15 / January / 2012, 14:19:55 by Sektor »

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #567 on: 15 / January / 2012, 14:32:10 »
with ACID it is saying "no firmware revision" :S

and does the lock have to be on for CHDK to run?..

and if i uNlock it then CHDK will go?.


Usually im prone to loosing memory cards if i cary more than 1. :P and on on the move i can't keep installing and removing CHDK, since i wont be having a laptop .. :P


If i install the wrong firmware, will anything happen?


*

Offline Sektor

  • *
  • 13
  • ixus220_elph300hs-101a
    • Grand Theft Media Press
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #568 on: 15 / January / 2012, 14:37:14 »
If the lock is off then CHDK will only run if you manually run it by selecting "firmware update" through the camera menu.

I'm not sure what you meant by "resized on the email". Use an unmodified image from the camera when trying to determine version.

Wrong version of CHDK just won't run. It won't harm your camera.
« Last Edit: 15 / January / 2012, 14:38:52 by Sektor »

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #569 on: 15 / January / 2012, 14:43:29 »
Thanks for providing that information. :) i will keep the lock off, so i can decide each time which system i want to boot into .. :) (Will my CHDK settings be saved after reboot?)

Actually i left my camera at a friend's house, and i told him to email me the picture, he sent a resized version. I will try to get a proper version.

Ok i thought it might harm my camera. LOL

 

Related Topics