ELPH300HS aka IXUS220HS - Porting Thread - page 9 - DryOS Development - CHDK Forum

ELPH300HS aka IXUS220HS - Porting Thread

  • 899 Replies
  • 428139 Views
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #80 on: 20 / June / 2011, 17:32:43 »
Advertisements
Small problem. I get this error when I try to compile in a new directory I have created for the platform.
========== C:\CHDK\T\TRUNK\TRUNK1210\BIN\LOGS\ERR-IXUS220_300HS-100C.TXT ==========

C:\chdk\t\gcc451\bin\gmake.exe: *** ixus220_300HS: No such file or directory.  Stop.
C:\chdk\t\gcc451\bin\gmake.exe[1]: *** [clean-recursive] Error 1
gmake: *** [clean-recursive] Error 1
 

When I place all of the files in an existing directory I get a different error.

========== C:\CHDK\T\TRUNK\TRUNK1210\BIN\LOGS\ERR-G12-100C.TXT ==========

Time to generate stubs 13.99 seconds
C:\chdk\t\gcc451\bin\gmake.exe[4]: *** [stubs_entry.S] Error 1
C:\chdk\t\gcc451\bin\gmake.exe[3]: *** [all-recursive] Error 1
C:\chdk\t\gcc451\bin\gmake.exe[2]: *** [all-recursive] Error 1
C:\chdk\t\gcc451\bin\gmake.exe[1]: *** [all-recursive] Error 1
gmake: *** [all-recursive] Error 1
 

If anyone knows what I am doing wrong I would appreciate some help. These errors are not very intuitive.

*

Offline funnel

  • ****
  • 349
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #81 on: 20 / June / 2011, 17:55:54 »
It's not clear what you've done until now.

To start you should:
-add the camera folder to trunk/platform and trunk/loader folder
-add the camera in trunk/makefile.inc
-put the PRIMARY.BIN in platform/camera/sub/VER folder

Be careful when calling gmake, uppercase and lowercase letters matter.
« Last Edit: 20 / June / 2011, 17:57:25 by funnel »

*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #82 on: 20 / June / 2011, 18:03:11 »
Hi ChrisWillh,

Quote
C:\chdk\t\gcc451\bin\gmake.exe: *** ixus220_300HS: No such file or directory.  Stop.

You need specific folders for your camera in both the /loader and the /platform directories, the error
suggests at least one is missing, or maybe a typo (are the names identical ?)

hth,

wim


Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #83 on: 21 / June / 2011, 11:30:54 »
Thanks guys, I was missing the loader folder. I am still gettting the stubs_entry.s error however. I've tried searching to see if anyone else has had the same problem, but no luck so far. I'll try a few other things and see if I can get it working.

*

Offline tommi2water

  • ***
  • 157
  • IXUS 220 HS Firmware: 1.00c
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #84 on: 27 / June / 2011, 15:31:00 »
Hi Chris,

have you already been able to solve your problem?

I'm wondering how I could support you. I just owned an IXUS 220 HS and would like to support the CHDK development for this device. I already used CHDK on my S5 IS two years ago.

Please let me know if and how I can support you. Maybe you could share your loader and platform folder for the IXUS 220 HS device that I can also try to build the CHDK?

Thanks in advance!

Best regards,
tommi

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #85 on: 07 / July / 2011, 12:05:32 »
Dear thread,

I have an elph 300 hs and will be greatly pleased if a successful port is released. If there is anything I can do to help please let me know.

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #86 on: 12 / July / 2011, 12:21:53 »
RL is kind of crazy right now, so this has taken a back seat. I will hopefully have time to work on this agin in September. Untill then anyoine else is welcome to start this as I don't really have anything working yet.

*

Offline FaKK

  • *
  • 17
Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #87 on: 24 / July / 2011, 13:56:25 »
After ixus100is and SX1IS I'd also like my 220hs to do the magic. Where can I find the actual beta, it's not online at http://www.box.net/chdk  ->  ixus220hs_elph300hs_100c.7z anymore.

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #88 on: 24 / August / 2011, 08:05:38 »
I've read the topic until here and didn't find if there is a dumped firmware of IXUS 220 HS Version GM1.01A.
I would like to provide this Version of Firmware. So where can i upload this primary.bin?

Re: ELPH300HS aka IXUS220HS - Porting Thread
« Reply #89 on: 24 / August / 2011, 10:40:14 »
Upload it at zshare, for example, and then post it in firmware dumping forum section

 

Related Topics


SimplePortal © 2008-2014, SimplePortal