ELPH300HS aka IXUS220HS - Porting Thread - page 11 - DryOS Development

philmoz

3450

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #100 on: 05 / October / 2011, 03:15:28 »

Advertisements

Quote from: blueman on 05 / October / 2011, 00:13:10

Mmmm ok , I missed a good chunk of the wiki "for developper".... Working on it now.
Any hint on where to find the files for the 100HS ?

The last post from anyone who had reported any success was in July (http://chdk.setepontos.com/index.php?topic=6341.msg70181#msg70181)

ChrisWillh has not logged into the forum since then and it does not look like he uploaded his source code anywhere.

You can try sending him a personal message as that may send an alert to his email address.

Phil.

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

blueman

3

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #101 on: 05 / October / 2011, 07:24:13 »

Thanks Phil.
Do you think you would be able to generate with your tool a stubs_entry.S file for the Ixus220 firmware version 1.01A ? Because it's the model I have.
I sent a PM to ChrisWill. The developper of the Elph 100HS will also send me his source code. With the 2 I should be able to figure out something I hope.

Thanks,
BM

Logged

philmoz

3450

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #102 on: 06 / October / 2011, 00:01:12 »

Quote from: blueman on 05 / October / 2011, 07:24:13

Thanks Phil.
Do you think you would be able to generate with your tool a stubs_entry.S file for the Ixus220 firmware version 1.01A ? Because it's the model I have.
I sent a PM to ChrisWill. The developper of the Elph 100HS will also send me his source code. With the 2 I should be able to figure out something I hope.

Thanks,
BM

Once you've got the build environment set up, copy your firmware dump to the subs/101a folder as PRIMARY.BIN.
The build process will automatically generate the stubs_entry.S file from your firmware dump.

Phil.

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

unARMed

9

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #103 on: 28 / October / 2011, 18:49:22 »

blueman - any progress on the port?

Logged

niccolini

5

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #104 on: 06 / November / 2011, 13:23:54 »

Hi I'm new here;-) I was trying CHDK for IXUS 220 * / 300 ELPH 1.01C thank you in advance.
I tried the 1.01a but I will not charge.

Logged

waterwingz

12140

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #105 on: 06 / November / 2011, 15:29:26 »

Quote from: niccolini on 06 / November / 2011, 13:23:54

Hi I'm new here;-) I was trying CHDK for IXUS 220 * / 300 ELPH 1.01C thank you in advance.
I tried the 1.01a but I will not charge.

Probably best for you to follow this thread : ELPH300HS aka IXUS220HS - Porting Thread

and read this if you are unfamiliar with how CHDK is ported to different cameras : CHDK FAQ : My camera isn't ported yet

Logged

Ported : A1200 SD940 G10 Powershot N G16

niccolini

5

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #106 on: 06 / November / 2011, 16:49:53 »

I read a lot but I think there is no confusion still seems to me that they have arrived to version 1.01a.
Then I can not get in update mode .. I read a lot even if you could give me the exact sequence with play then I light up func-set the clock but I do not get the files have no say in the main tab and the card is unlocked.

Logged

waterwingz

12140

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #107 on: 06 / November / 2011, 17:01:03 »

Quote from: niccolini on 06 / November / 2011, 16:49:53

I read a lot but I think there is no confusion still seems to me that they have arrived to version 1.01a.
Then I can not get in update mode .. I read a lot even if you could give me the exact sequence with play then I light up func-set the clock but I do not get the files have no say in the main tab and the card is unlocked.

While it is possible that 1.01a will work in your 1.01c camera, it is not very likely. But if you want to try, let us know what you have done so far ? Are you using Windows or a Mac ? Did your start the camera by pressing the Play button rather than the On/Off button ?

Logged

Ported : A1200 SD940 G10 Powershot N G16

niccolini

5

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #108 on: 06 / November / 2011, 17:11:21 »

I use win xp a card formatted in FAT 32 from 4 GMB I've copied the file into strings and primary and there are no other files or photos
I put the card into the camera is not locked I turned on the camera by pressing the play button poiil func to set until the clock does not start and I stop here ...

www.photofacebook.it

« Last Edit: 06 / November / 2011, 17:18:15 by niccolini »

Logged

Slipperywhenwet5

2

Re: ELPH300HS aka IXUS220HS - Porting Thread

« Reply #109 on: 06 / November / 2011, 18:07:03 »

What is the current state of this port? I really want some of the manual features CHDK offers, since there is few built in (no manual focus, etc)

Also, is there anyway someone with no coding experience could aid in the porting process?

Logged