Windows GUI for CHDK porting

  • 98 Replies
  • 105878 Views
Re: Windows GUI for CHDK porting tools
« Reply #10 on: 29 / May / 2011, 11:19:18 »
Advertisements
The actual Beta/Alpha for the 495f seems to make good work - in the german-board are some people who get this thing work good. (scipts included)
Please post a link to where you got the source for the D & F firmware ?  Probably better that I use the most recent - what you sent me earlier is only the sub directory.

Quote
What do you mean with "create build environment" in the chdk-shell ?
I was asking if you were able to setup CHDK-Shell and create the firmware for 100d, 100e & 100f.  It seems you were sucessful - good job !
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Windows GUI for CHDK porting tools
« Reply #11 on: 29 / May / 2011, 11:34:25 »
Hi and thx for your answer !

I got the D and F Firmware on the german downloadsite http://forum.chdk-treff.de/download.php
Here you have only to point to "A Series" and the "A495"

Oder do you mean the trunk for the cam ?
Sry but the technical therms are confusing me at this moment.

Re: Windows GUI for CHDK porting tools
« Reply #12 on: 29 / May / 2011, 11:37:07 »
Here i found the source code for this cam http://my-svn.assembla.com/svn/chdkde/trunk/platform/a495/

Hopefully this helps...

Re: Windows GUI for CHDK porting tools
« Reply #13 on: 29 / May / 2011, 11:38:30 »
Or do you mean the trunk for the cam ?
Yes - I need the most current trunk for the camera.  Thanks.

Ported :   A1200    SD940   G10    Powershot N    G16


Re: Windows GUI for CHDK porting tools
« Reply #14 on: 29 / May / 2011, 11:39:10 »
Here i found the source code for this cam http://my-svn.assembla.com/svn/chdkde/trunk/platform/a495/

Hopefully this helps...
That's it - time for me to do a little typing.

Ported :   A1200    SD940   G10    Powershot N    G16

Re: Windows GUI for CHDK porting tools
« Reply #15 on: 29 / May / 2011, 11:48:33 »
Puh - happy that i have done this good ^^

Thanks - If this will be made working your my saviour !

Re: Windows GUI for CHDK porting tools
« Reply #16 on: 29 / May / 2011, 14:25:12 »
I have added all files without the dumped firmware - maybe you can show me what addresses i have to look for.
So I'm not having a great day so far.  The firmware dumps for the 100e and 100f versions do not appear to be available at http://www.box.net/chdk#/chdk/6/55272271

Where did you get yours from ?  Can you send to me ?  (maybe via www.box.net  - open a free account ?)

Ported :   A1200    SD940   G10    Powershot N    G16

Re: Windows GUI for CHDK porting tools
« Reply #17 on: 29 / May / 2011, 14:43:15 »
Have send you a link to the Files on a private Webspace.

The 100E Dump is made by me - the 100F found in Web.


*

Offline msl

  • *****
  • 1239
  • A720 IS, SX220 HS 1.01a
    • CHDK inside
Re: Windows GUI for CHDK porting tools
« Reply #18 on: 29 / May / 2011, 14:53:48 »
The 100d & 100f dump you can find in syahmixps source code of the A495.

msl
German CHDK pages:  CHDK forum | CHDK inside | CHDK Twitter News by msl | Download CHDK-DE (Autobuild)
Note: SDM violates the GPL rules!

Re: Windows GUI for CHDK porting tools
« Reply #19 on: 29 / May / 2011, 20:55:55 »
@HankeyPoo :   give this a try :  http://www.box.net/shared/k3ic8xzer6.
Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics