PowerShot SX230 HS - Porting Thread - page 34 - General Discussion and Assistance - CHDK Forum supplierdeeply
« previous next »
Pages: 1 ... 29 30 31 32 33 [34] 35 36 37 38 39 ... 71   Go Down

PowerShot SX230 HS - Porting Thread

  • 706 Replies
  • 326227 Views
*

Offline sebastc09

  • *
  • 20
Re: PowerShot SX230 HS - Porting Thread
« Reply #330 on: 23 / September / 2011, 16:32:21 »
Advertisements
Hello again! The chdk works perfectly! but how can i run scripts like MANUAL FOCUS in video, or ULTRA INTERVALOMETER.

I don't know where i can download these scripts.. here i cannot found a download link.. http://chdk.wikia.com/wiki/UBASIC/Scripts:_Ultra_Intervalometer

P.S: Sorry for my bad english

P.S2: I found some videos here Canon SX230HS with CHDK | manual focus in video mode demo and here Canon Powershot SX220HS timelapse test 2 (chdk intervalometer) full hd
« Last Edit: 23 / September / 2011, 16:36:23 by sebastc09 »
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: PowerShot SX230 HS - Porting Thread
« Reply #331 on: 23 / September / 2011, 17:55:22 »
Quote from: sebastc09 on 23 / September / 2011, 16:32:21
Hello again! The chdk works perfectly! but how can i run scripts like MANUAL FOCUS in video, or ULTRA INTERVALOMETER.

I don't know where i can download these scripts.. here i cannot found a download link.. http://chdk.wikia.com/wiki/UBASIC/Scripts:_Ultra_Intervalometer

The code for several versions of the Ultra_Intervalometer is posted directly in the wiki page you linked.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline sebastc09

  • *
  • 20
Re: PowerShot SX230 HS - Porting Thread
« Reply #332 on: 24 / September / 2011, 00:27:36 »
Quote from: waterwingz on 23 / September / 2011, 17:55:22
Quote from: sebastc09 on 23 / September / 2011, 16:32:21
Hello again! The chdk works perfectly! but how can i run scripts like MANUAL FOCUS in video, or ULTRA INTERVALOMETER.

I don't know where i can download these scripts.. here i cannot found a download link.. http://chdk.wikia.com/wiki/UBASIC/Scripts:_Ultra_Intervalometer

The code for several versions of the Ultra_Intervalometer is posted directly in the wiki page you linked.



But i don't understand which code is for the sx230, sorry :(
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: PowerShot SX230 HS - Porting Thread
« Reply #333 on: 24 / September / 2011, 00:42:15 »
Quote from: sebastc09 on 24 / September / 2011, 00:27:36
But i don't understand which code is for the sx230, sorry :(

While some of the code in the wiki and forum is specific to some carmera (or OS version numbers),  the code on the page you linked should work with all cameras.

So all the code on that page will work with your sx230.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline grahamlyth

  • *
  • 2
Re: PowerShot SX230 HS - Porting Thread
« Reply #334 on: 24 / September / 2011, 09:09:33 »
Quote from: taliesin on 09 / September / 2011, 20:43:16
For now,

sx230hs 101a - Beta6
Now with some basic GPS info on DNG's thanks to genie.

DISKBOOT.BIN - http://www.box.net/shared/ikud70g65u0mrk3updpo
PS.FI2 - http://www.box.net/shared/t25akhg01aqb11huic61

Taliesin


Hi Taliesin,

So far, this version works great for me, with one exception.

From my testing, this version has:

No problem with crashing during video recording, as reported by sylikc. Tested at 1080p24, up to 10 minutes in duration.
No problem with >ISO400 :-)

However, there is definitely something weird going on with JPEG compression. With the camera set to JPEG Compression Fine, file sizes are larger with CHDK switched off than they are with CHDK on (with all overrides disabled). Exif shows Fine compression in each case. Anecdotally (I don't have a properly controlled test to prove it) the difference in file size seems to be greater with complex scenes.

Thanks again for all your hard work on this taliesin, it's very much apreciated.


Graham
Logged
*

Offline sylikc

  • **
  • 66
  • SX230HS 1.00c, SD750 1.02a ;)
Re: PowerShot SX230 HS - Porting Thread
« Reply #335 on: 25 / September / 2011, 04:49:28 »
Quote from: taliesin on 21 / September / 2011, 00:19:52
Ill have a look into it this weekend if I get time.

If possible can you post the contents of the ROMLOG. To create it requres some modification to SD CARD. The instrustructions are on the CHDK Wiki.

Thanks
Michael

Michael,

I finally got around to getting the ROMLOG from my camera (1.0.1a running CHDK 0.9.9-1324)


ASSERT!! DispCon.c Line 1452
Occured Time  2011:09:17 20:06:55
ISR : vector=105
ShootConDump:
0f 0f 0f 0f 0f 0f 0f 0f 0f 0f
CameraConDump:
07 0a 02 0d 09 01 0f 0f 0f 0f
00020370: UI:DSIC:83,13
00021370: UI:ShootSeqToUI:0x2020:adr:0xe,Para:14
00021380: UI:DSIC:83,14
00022370: UI:ShootSeqToUI:0x2020:adr:0xf,Para:15
00022380: UI:DSIC:83,15
00023370: UI:ShootSeqToUI:0x2020:adr:0x10,Para:16
00023380: UI:DSIC:83,16
00024380: UI:ShootSeqToUI:0x2020:adr:0x11,Para:17
00024380: UI:DSIC:83,17
00025380: UI:ShootSeqToUI:0x2020:adr:0x12,Para:18
00025380: UI:DSIC:83,18
00026380: UI:ShootSeqToUI:0x2020:adr:0x13,Para:19
00026380: UI:DSIC:83,19
00027380: UI:ShootSeqToUI:0x2020:adr:0x14,Para:20
00027380: UI:DSIC:83,20
00028380: UI:ShootSeqToUI:0x2020:adr:0x15,Para:21
00028380: UI:DSIC:83,21
00029380: UI:ShootSeqToUI:0x2020:adr:0x16,Para:22
00029380: UI:DSIC:83,22
00030380: UI:ShootSeqToUI:0x2020:adr:0x17,Para:23
00030380: UI:DSIC:83,23
00031380: UI:ShootSeqToUI:0x2020:adr:0x18,Para:24
00031390: UI:DSIC:83,24
00032380: UI:ShootSeqToUI:0x2020:adr:0x19,Para:25
00032390: UI:DSIC:83,25
00033390: UI:ShootSeqToUI:0x2020:adr:0x1a,Para:26
00033390: UI:DSIC:83,26
00034390: UI:ShootSeqToUI:0x2020:adr:0x1b,Para:27
00034390: UI:DSIC:83,27
00035390: UI:ShootSeqToUI:0x2020:adr:0x1c,Para:28
00035390: UI:DSIC:83,28
00036390: UI:ShootSeqToUI:0x2020:adr:0x1d,Para:29
00036390: UI:DSIC:83,29
00037390: UI:ShootSeqToUI:0x2020:adr:0x1e,Para:30
00037390: UI:DSIC:83,30
00038390: UI:ShootSeqToUI:0x2020:adr:0x1f,Para:31
00038390: UI:DSIC:83,31
00039390: UI:ShootSeqToUI:0x2020:adr:0x20,Para:32
00039390: UI:DSIC:83,32
00040390: UI:ShootSeqToUI:0x2020:adr:0x21,Para:33
00040390: UI:DSIC:83,33
00041360: UI:ShootSeqToUI:0x2020:adr:0x22,Para:34
00041360: UI:DSIC:83,34
00042360: UI:ShootSeqToUI:0x2020:adr:0x23,Para:35
00042360: UI:DSIC:83,35
00043360: UI:ShootSeqToUI:0x2020:adr:0x24,Para:36
00043360: UI:DSIC:83,36
00044360: UI:ShootSeqToUI:0x2020:adr:0x25,Para:37
00044370: UI:DSIC:83,37
00045360: UI:ShootSeqToUI:0x2020:adr:0x26,Para:38
00045360: UI:DSIC:83,38
00046360: UI:ShootSeqToUI:0x2020:adr:0x27,Para:39
00046370: UI:DSIC:83,39
00047360: UI:ShootSeqToUI:0x2020:adr:0x28,Para:40
00047370: UI:DSIC:83,40
00048370: UI:ShootSeqToUI:0x2020:adr:0x29,Para:41
00048370: UI:DSIC:83,41
00049370: UI:ShootSeqToUI:0x2020:adr:0x2a,Para:42
00049370: UI:DSIC:83,42
00050370: UI:ShootSeqToUI:0x2020:adr:0x2b,Para:43
00050370: UI:DSIC:83,43
00051370: UI:ShootSeqToUI:0x2020:adr:0x2c,Para:44
00051370: UI:DSIC:83,44
00052370: UI:ShootSeqToUI:0x2020:adr:0x2d,Para:45
00052370: UI:DSIC:83,45
00053370: UI:ShootSeqToUI:0x2020:adr:0x2e,Para:46
00053370: UI:DSIC:83,46
00054370: UI:ShootSeqToUI:0x2020:adr:0x2f,Para:47
00054370: UI:DSIC:83,47
00055370: UI:ShootSeqToUI:0x2020:adr:0x30,Para:48
00055370: UI:DSIC:83,48
00056370: UI:ShootSeqToUI:0x2020:adr:0x31,Para:49
00056380: UI:DSIC:83,49
 

Btw, I wasn't entirely correct to say that it doesn't record anything when it crashes.  I found a MVI_####.TMP file where the .MOV file should've been.... so in any case, it was 0 bytes, so it didn't commit any data to the file.

HTH
/sylikc
Logged
props to TPC + PhyrePhox for SD750 work: IXUS75/SD750 1.01a | 1.00b | 1.02a Thread
props to quietschi for multipartition support + button fixes!
SD750 bracketing issues
*

Offline georg12

  • *
  • 2
Re: PowerShot SX230 HS - Porting Thread
« Reply #336 on: 01 / October / 2011, 09:39:25 »
Hello,

I have the Firmware ver.

GM1.0.1B (1.0.1.0)

is there a chdk for this firmware version?
Logged
*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: PowerShot SX230 HS - Porting Thread
« Reply #337 on: 01 / October / 2011, 10:05:49 »
Quote from: georg12 on 01 / October / 2011, 09:39:25
I have the Firmware ver. GM1.0.1B (1.0.1.0) is there a chdk for this firmware version?

Yes, see here: http://mighty-hoernsche.de

msl
Logged
CHDK-DE:  CHDK-DE links
*

Offline georg12

  • *
  • 2
Re: PowerShot SX230 HS - Porting Thread
« Reply #338 on: 01 / October / 2011, 10:11:07 »
thx
Logged
*

Offline ldje

  • *
  • 1
Re: PowerShot SX230 HS - Porting Thread
« Reply #339 on: 06 / October / 2011, 08:59:16 »
Hi, I',m new here and just downloaded yesterday the 101a chdk the easy way for mac. After removing Mac flags on all files the software did run immediately. Thanks to the guys that put all the effort into this!!
One observation may be useful for the developers, I hope: when asking for storing RAW plus JPG no RAW is taken but only a JPG. After removing the dot RAWs were taken, as well as a JPG. Maybe someone can look into this.
Another one: I can only use DNG format, as Photoshop, nor any of the image capture programs that i know, can read the CRW or CR2 extension formats. Anyone can explain?

Ludwig
Logged
Pages: 1 ... 29 30 31 32 33 [34] 35 36 37 38 39 ... 71   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal