PowerShot SX230 HS - Porting Thread - page 51 - General Discussion and Assistance - CHDK Forum supplierdeeply
« previous next »
Pages: 1 ... 46 47 48 49 50 [51] 52 53 54 55 56 ... 71   Go Down

PowerShot SX230 HS - Porting Thread

  • 706 Replies
  • 273147 Views
*

Offline Buffernut

  • *
  • 17
Re: PowerShot SX230 HS - Porting Thread
« Reply #500 on: 13 / February / 2012, 22:25:40 »
Advertisements
Quote from: GreedyRogue on 12 / February / 2012, 18:49:13
Sure, here are the numbers of errors reported along with the ms speed used;
200 - 0 errors
150 - 0 errors
100 - 0 errors
50 - 0 errors
25 - 0 errors
15 - 0 errors
10 - 0 errors
5 - 0 errors
1 - 0 errors
1 - 0 errors
0 - 7 errors
0 - 5 errors

I ran the 1ms and the 0ms delayed tests twice each as listed above. All tests run using the setmode you posted above. Any other tests I can run for you?

Is there any known or possible kind of test that could catch the movie mode crashing? Build 1659 still reliably crashes on every video setting (with firmware 1.01c).
Logged
*

Offline GreedyRogue

  • *
  • 22
Re: PowerShot SX230 HS - Porting Thread
« Reply #501 on: 14 / February / 2012, 11:30:15 »
I assume you have a 101e firmware buffnut? I have done a few short clips, nothing serious, and have yet to see a crash in video mode. My issue is with the scripts as stated above.

I did just notice however that I am using the 1645 version. I'll try updating to the 1659 and see what happens.

Update;
Installed the 1659 and all movie modes work, with at least 3 seconds each recorded. However now the hdr script that gave me all black pictures now turns off with a camera error. Going to run all the tests and see what happens. Didn't realize I was using an old version before.

Did the same testing I did before and same results. I also ran all the tests in the test folder and everything passed except uartrtst.log failed with a :7: error: requires CHDK build with native function call support. Not sure if that is important or not.
« Last Edit: 14 / February / 2012, 11:59:57 by GreedyRogue »
Logged
*

Offline reyalp

  • ******
  • 13840
Re: PowerShot SX230 HS - Porting Thread
« Reply #502 on: 14 / February / 2012, 12:25:03 »
Quote from: GreedyRogue on 14 / February / 2012, 11:30:15
Did the same testing I did before and same results. I also ran all the tests in the test folder and everything passed except uartrtst.log failed with a :7: error: requires CHDK build with native function call support. Not sure if that is important or not.
Native function calls (see http://chdk.wikia.com/wiki/Lua/Lua_Reference/Native_Function_Calls  ) are not enabled in the autobuilds.

Quote from: Buffernut on 13 / February / 2012, 22:25:40
Is there any known or possible kind of test that could catch the movie mode crashing? Build 1659 still reliably crashes on every video setting (with firmware 1.01c).
Have you ever changed/enabled the video compression override settings ?

What exactly happens when it crashes: Does anything appear on the display first, does it shut down or just freeze ? How long does it run for before it crashes ?

Do you have "af scan in video" enabled ?

A romlog http://chdk.wikia.com/wiki/Debugging#Camera_crash_logs_.28romlog.29 might shed some light on the situation.
Logged
Don't forget what the H stands for.
*

Offline Lebeau

  • ***
  • 187
Re: PowerShot SX230 HS - Porting Thread
« Reply #503 on: 15 / February / 2012, 10:40:33 »
I tried sx230hs-101a-1.0.0-1659-full_BETA and things work well.

I tried 1572 and 1672 compiled version and no raw/dng after leaving Alt mode. ??? Returning in Alt mode, raw is disabled ! Re-enabling it, script is capturing raw/dng. Sometimes, the raw flag doesn't reset, dépending of zoom factor ????

Now, it seams intermittent :(

Forget that ! It seams that raw toggle key is "Display" in <Alt> mode :( :( :( same as "Display+Set" to de-Alt mode :(
« Last Edit: 15 / February / 2012, 18:30:42 by Lebeau »
Logged
*

Offline TobiMarg

  • **
  • 81
Re: PowerShot SX230 HS - Porting Thread
« Reply #504 on: 16 / February / 2012, 08:22:15 »
Quote from: Lebeau on 15 / February / 2012, 10:40:33
I tried 1572 and 1672 compiled version and no raw/dng after leaving Alt mode. ???
...
Forget that ! It seams that raw toggle key is "Display" in <Alt> mode :( :( :( same as "Display+Set" to de-Alt mode :(
I had also that problem, but if you press Set and then Display it works without disabling raw.
Otherwise you can use another button to toggle Alt-mode (I use [>] key and it works well).
Logged
*

Offline Lebeau

  • ***
  • 187
Re: PowerShot SX230 HS - Porting Thread
« Reply #505 on: 16 / February / 2012, 10:35:06 »
With my SX230 HS, I am trying to manually focus during video capture. I unsuccessfully tried CHDK and now CHDK-DE since I saw the following video
Canon SX230HS with CHDK | manual focus in video mode demo

I followed the following instructions
http://chdk.bplaced.net/content/chdk-inside/26-bedienung/90-manueller-fokus-bei-video-aufnahmen.html
Quote
Translate from German

Manual focus on video recording
Friday the 30th April 2010 at 09:07 clock    msl 
The video recording is at a photo-camera is a nice addition. Canon has this feature not given much importance. Only recently cameras have come on the market that can record videos in high definition.

With CHDK, the video-recording function can be enhanced significantly. The most-CHDK supported cameras can now use the optical zoom while recording. Influence of auto focus and video quality are also possible.

As it would be, even with manual focus to film?

Does the camera to manual focus ( MF ) as a mode to which the following workflow is easy to implement:

Choose a video recording mode.
Enable manual focus.
If necessary, select the focus.
Video-recording start.
Switch to <ALT> mode.
With
/
, the step size for changing the focus to select. This can also be set before recording.
Change with [Zoom] focus.
Evt. the keys can vary depending on camera model. On manual focus and keyboard controls are in CHDK manual on page 71 read more.

If you have activated the status indicator will increment and subject distance also displayed.

Way to achieve beautiful effects, video recording, you will probably also look at real video cameras.

 
but it doesn't seam to work.

Did I miss something ?
Is CHDK able to do manual focus during video capture ?

Note: I bought SX230hs to do so :)
« Last Edit: 16 / February / 2012, 10:37:01 by Lebeau »
Logged
*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: PowerShot SX230 HS - Porting Thread
« Reply #506 on: 16 / February / 2012, 11:16:25 »
MF in video works fine for me (SX220).  :)

Try the following steps:
- Choose P mode
- Switch into ALT mode and start CHDK menu.
- Select 'Extra Photo Operations', go to 'Override Subj. Dist. Value' and 'Value Factor (mm)'.
- Choose a step width in 'Value Factor (mm)', e.g. 10.
- Set a min. subject distance in 'Override Subj. Dist. Value'.
- Leave the menu & ALT mode.
- Choose MF and set subject distance with jogdial to a minimal value.
- Switch into ALT mode. Now you see the status display with subject distance and step width.
- Use the zoom lever. When you can change the subject distance, you have won.

Leave the ALT mode. Start video recording with MF mode. Switch into ALT mode and use the zoom lever for subject distance.

msl
 
Logged
CHDK-DE:  CHDK-DE links
*

Offline true

  • *
  • 35
  • SX230, SX260, 5DmkII, and more :)
Re: PowerShot SX230 HS - Porting Thread
« Reply #507 on: 16 / February / 2012, 16:15:23 »
For people with accidental RAW disabling: I find it much easier to use Play as my ALT button. Far easier to activate and Play still works if you hold it for a second. Plus I never accidentally disable RAW :)
Logged
Canon P&S: 110HS, SX260HS, SX230HS, 2x A720 IS, 2x A590 IS
Canon DSLR: 5D Mark II, 300D IR-converted, 8x glass
MFT: DMC-GF1, DMC-G3, 7x glass
*

Offline Buffernut

  • *
  • 17
Re: PowerShot SX230 HS - Porting Thread
« Reply #508 on: 17 / February / 2012, 21:50:15 »
Quote
Have you ever changed/enabled the video compression override settings ?
Yes. Even setting a low quality value in 320x240 15fps mode has no effect on the crashing behavior.

Quote
What exactly happens when it crashes: Does anything appear on the display first, does it shut down or just freeze ? How long does it run for before it crashes ?
The camera turns off without retracting the lens. As far as I can see, nothing appears on the display before it turns off.  It does not save a video file. This can happen at any time, from a few seonds after pushing the video button up to 10 minutes or more into a video recording. It doesn't happen with non-CHDK video, even in 30 Mbps 1080p mode or 40Mbps iFrame 720p mode.

Quote
Do you have "af scan in video" enabled ?
Unsure. It's using whatever the default is, because I can't find that setting anywhere on the menus (in the autobuild version).

Quote
A romlog http://chdk.wikia.com/wiki/Debugging#Camera_crash_logs_.28romlog.29 might shed some light on the situation.

I might have found something related to the bug. When I set Video Quality Control OFF a couple of hours ago, the video didn't crash - for the first time ever. It's now completed two one hour videos without problems. When I get home, I'll set Video Quality Control back ON and I would expect the crashing to resume at that time. If so, I'll upload a romlog for you.
Logged
*

Offline reyalp

  • ******
  • 13840
Re: PowerShot SX230 HS - Porting Thread
« Reply #509 on: 18 / February / 2012, 00:20:16 »
Quote from: Buffernut on 17 / February / 2012, 21:50:15
Quote
Have you ever changed/enabled the video compression override settings ?
Yes. Even setting a low quality value in 320x240 15fps mode has no effect on the crashing behavior.
I was referring to the CHDK override, not any Canon firmware setting.

Quote
The camera turns off without retracting the lens. As far as I can see, nothing appears on the display before it turns off.  It does not save a video file. This can happen at any time, from a few seonds after pushing the video button up to 10 minutes or more into a video recording.
Thanks for the clear description.
Quote
Quote
Do you have "af scan in video" enabled ?
Unsure. It's using whatever the default is, because I can't find that setting anywhere on the menus (in the autobuild version).
It would be in the same menu as the video quality setting, labeled "AF Key". It might be disabled in your build. If it's blank, then no key is assigned.
Quote
I might have found something related to the bug. When I set Video Quality Control OFF a couple of hours ago, the video didn't crash - for the first time ever.
What is the 'Video Mode" setting in that menu ? Default should disable the quality override feature completely. Checking the quality control checkbox should just allow you to change the quality while recording.
« Last Edit: 18 / February / 2012, 00:27:25 by reyalp »
Logged
Don't forget what the H stands for.
Pages: 1 ... 46 47 48 49 50 [51] 52 53 54 55 56 ... 71   Go Up
« previous next »
 

Related Topics