Motion Detection - Builds? - General Help and Assistance on using CHDK stable releases

tbates57

1

Motion Detection - Builds?

« on: 07 / June / 2011, 23:33:43 »

Advertisements

UBASIC/Scripts: Multipurpose Motion Detection states "Required CHDK build: Fingalo's build 119 or Allbest". I've successfully downloaded build 0.9.9-1196 as the "correct" build for my S3IS. Is there a motion detection script for this build or where would I find the "required" builds?

Logged

fe50

3152
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: Motion Detection - Builds?

« Reply #1 on: 08 / June / 2011, 01:08:54 »

Hello & welcome, tbates57 !

Quote from: tbates57 on 07 / June / 2011, 23:33:43

UBASIC/Scripts: Multipurpose Motion Detection states "Required CHDK build: Fingalo's build 119 or Allbest". I've successfully downloaded build 0.9.9-1196 as the "correct" build for my S3IS. Is there a motion detection script for this build or where would I find the "required" builds?

MD (Motion Detection) is part of the "standard" CHDK for a long time now...

--> http://chdk.setepontos.com/index.php/topic,471.msg21328.html#msg21328 (fudgey's FastMD script)
--> http://chdk.setepontos.com/index.php/topic,471.msg33474.html#msg33474 (Fast MD guidance)

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

SDC

2

Re: Motion Detection - Builds?

« Reply #2 on: 08 / June / 2011, 04:47:33 »

Quote from: fe50 on 08 / June / 2011, 01:08:54

MD (Motion Detection) is part of the "standard" CHDK for a long time now...

What is the standard CHDK ?
Are you saying the MD is included in that ?
I downloaded the build 0.9.0-1200 for my S3IS from the downloads page I dont see any mention of MD in it or in the user manual ....

Logged

fe50

3152
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: Motion Detection - Builds?

« Reply #3 on: 08 / June / 2011, 06:41:33 »

Quote from: SDC on 08 / June / 2011, 04:47:33

What is the standard CHDK ?

--> http://chdk.wikia.com/wiki/Downloads

Quote

Are you saying the MD is included in that ?

Yes

Quote

I downloaded the build 0.9.0-1200 for my S3IS from the downloads page I dont see any mention of MD in it or in the user manual ....

MD (Motion Detection) is a build-in CHDK feature available through the scripting interface, so just use the MD script from my link above, use one of the MD scripts from the CHDK wikia or build your own script (the scripting command for MD is md_detect_motion ).

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

SDC

2

Re: Motion Detection - Builds?

« Reply #4 on: 08 / June / 2011, 10:50:13 »

OK thanks but I already did what you suggested but the motion detection is very slow, no where near the 45-90ms quoted in the wiki informations this is why I came to this thread to find out if that is caused because I didnt use the CHDK build specified in the script readme

« Last Edit: 08 / June / 2011, 10:57:41 by SDC »

Logged