Patch file to enable the G10 to use set_focus() in both MF and non-MF modes.
I know the A590IS always has to be in MF for this to work. I wonder if this patch to enable the G10 to use set_focus() in both MF and non-MF modes will do the same using the A590IS.
#define CAM_CAN_SD_OVERRIDE 1 // Camera allows to do subject distance override #define CAM_CAN_SD_OVER_NOT_IN_MF 1 // Camera allows subject distance (focus) override when not in manual focus mode #undef CAM_CAN_SD_OVER_IN_AF_LOCK // Camera allows subject distance (focus) override when in AF Lock mode #undef CAM_CAN_SD_OVER_IN_AF_LOCK_ONLY // Camera allows subject distance (focus) override only when in AF Lock mode OR in movie mode #define CAM_HAS_MANUAL_FOCUS 1 // Camera has manual focus mode
Small patch for config file ID typo in 1.3.0.Was causing the "Shutter halfpress show" menu item to not save / restore properly.
Small fix for the "circles of confusion" parameter for the G10 found here : http://www.dofmaster.com/digital_coc.htmlI spot checked a few other cameras but did not find problems although I may very well have missed them if they are there.Should probably go in trunk and dev branches.
Fix for variable OSD font sizes not drawing misc values and state display properly as reported by msl here :http://chdk.setepontos.com/index.php?topic=10869.msg107011#msg107011
Index: modules/dng.c===================================================================--- modules/dng.c (revision 3220)+++ modules/dng.c (working copy)@@ -845,6 +845,7 @@ fwrite(c, 1, 4, f); } count = count + len;+ y += len - 1; } } }
Started by andre117 General Discussion and Assistance
Started by Bernd R General Discussion and Assistance
Started by quid « 1 2 » General Discussion and Assistance
Started by zell « 1 2 » General Discussion and Assistance
Started by srsa_4c « 1 2 » General Discussion and Assistance