Adding new cameras, applying patches into trunk (with source code prepared)

  • 1605 Replies
  • 391434 Views
*

Offline blackhole

  • *****
  • 642
  • A590IS 101b
    • Planetary astrophotography
Re: Adding new cameras, applying patches into trunk (with source code prepared)
« Reply #1600 on: 21 / November / 2018, 12:06:21 »
Advertisements
Source code for sx420is, firmware version 100a.

*

Offline reyalp

  • ******
  • 11592
Don't forget what the H stands for.

*

Offline reyalp

  • ******
  • 11592
Re: Adding new cameras, applying patches into trunk (with source code prepared)
« Reply #1602 on: 21 / November / 2018, 23:55:48 »
Source code for sx420is, firmware version 100a.
Checked in, trunk 5124. I left it disabled in the autobuild, let me know if you think it should be enabled.

Thanks for all the contributions :)
Don't forget what the H stands for.

*

Offline blackhole

  • *****
  • 642
  • A590IS 101b
    • Planetary astrophotography
Re: Adding new cameras, applying patches into trunk (with source code prepared)
« Reply #1603 on: 24 / November / 2018, 18:01:25 »
SX420is_100a:
changed status from PREALPHA to ALPHA
CAM_ACTIVE_AREA customized to the right dimensions
CAM_AV_OVERRIDE_IRIS_FIX and the associated changes
WIFI button as an option for ALT
removed CAM_SD_OVER_IN_AF, the camera allows SD override only when AFL or MF is set

I think we can add this camera to autobuild.
The CHDK for this camera has been used for several months, and we have no problems with it.

The same goes for sx610hs, test build is dawnloaded 89 times without reporting problems so we can assume that everything works well.


*

Offline blackhole

  • *****
  • 642
  • A590IS 101b
    • Planetary astrophotography
Re: Adding new cameras, applying patches into trunk (with source code prepared)
« Reply #1604 on: 24 / November / 2018, 18:02:27 »
Source code for sx430is, firmware version 100b.

*

Offline reyalp

  • ******
  • 11592
Re: Adding new cameras, applying patches into trunk (with source code prepared)
« Reply #1605 on: 24 / November / 2018, 20:54:55 »
Source code for sx430is, firmware version 100b.
Checked in, trunk 5127. Note I disabled FI2 building in makefile.inc until I can verify the autobuild has the right key. You'll need to comment out the override OPT_FI2= line if you want to build an FI2 locally.

edit:
Autobuild is not enabled for this port at the moment anyway, but I don't want to forget and have it break the build.
Don't forget what the H stands for.

 

Related Topics