Adding new cameras, applying patches into trunk (with source code prepared)

philmoz

3450

Re: Adding new cameras, applying patches into trunk (with source code prepared)

« Reply #700 on: 24 / April / 2012, 17:55:40 »

Advertisements

Quote from: srsa_4c on 23 / April / 2012, 17:10:40

A small patch to enable CAM_STARTUP_CRASH_FILE_OPEN_FIX for the G11, based on this report: http://chdk.setepontos.com/index.php?topic=8024.msg84630#msg84630 .

Added in revision 1825 (release-1.0) and 1826 (trunk).

Phil.

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

philmoz

3450

Re: Adding new cameras, applying patches into trunk (with source code prepared)

« Reply #701 on: 24 / April / 2012, 18:01:36 »

Quote from: outslider on 24 / April / 2012, 15:39:48

One line has to be changed in polish.lng. There was a bug with no-existing 'revision' line. Entry 107 should be as follow:

Code: [Select]
107 "Wersja CHDK: %s %s\nPoprawka: %s\nData: %s\nCzas: %s\nAparat: %s\nWersja FW: %s\nKompilator: %s"
BTW - the Revision entry shows value of '0' - what does this entry stand for?

EDIT: I'm talking about trunk version of CHDK, if this makes difference

Added in revision 1827.

The revision value is extracted from SVN. If you use CHDK-Shell or are building in a non-SVN directory it will be set to 0.

Phil.

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

c10ud

245

Re: Adding new cameras, applying patches into trunk (with source code prepared)

« Reply #702 on: 26 / April / 2012, 10:54:03 »

chdk for ixus105_sd1300 firmware 100d only. see attachment for the patch.

This is completely untested since i do not own the camera anymore.

I ported the code from SDM (since Microfunguy ported it from my first chdk port and tested it extensively) to current chdk-trunk so it doesn't get lost and maybe it helps others (e.g. ixus107 port).

Since it compiles correctly and i trust finsig i added it as ALPHA, but feel free to remove it if you are not ok with it.

greets

edit: updated patch with platform_camera.h which i forgot in previous commit

ixus105_100d.patch (120.28 kB - downloaded 82 times.)

« Last Edit: 27 / April / 2012, 07:56:09 by c10ud »

Logged

funnel

349

Re: Adding new cameras, applying patches into trunk (with source code prepared)

« Reply #703 on: 28 / April / 2012, 17:19:35 »

Added CAM_HAS_MOVIE_DIGEST_MODE to platform_camera.h.
Thanks.

sx220.patch (0.51 kB - downloaded 65 times.)

Logged

philmoz

3450

Re: Adding new cameras, applying patches into trunk (with source code prepared)

« Reply #704 on: 28 / April / 2012, 22:38:27 »

Quote from: funnel on 28 / April / 2012, 17:19:35

Added CAM_HAS_MOVIE_DIGEST_MODE to platform_camera.h.
Thanks.

Added in revision 1832.

Phil.

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

reyalp

14118

Re: Adding new cameras, applying patches into trunk (with source code prepared)

« Reply #705 on: 28 / April / 2012, 23:29:35 »

Quote from: c10ud on 26 / April / 2012, 10:54:03

chdk for ixus105_sd1300 firmware 100d only. see attachment for the patch.

This is completely untested since i do not own the camera anymore.

I ported the code from SDM (since Microfunguy ported it from my first chdk port and tested it extensively) to current chdk-trunk so it doesn't get lost and maybe it helps others (e.g. ixus107 port).

Since it compiles correctly and i trust finsig i added it as ALPHA, but feel free to remove it if you are not ok with it.

greets

edit: updated patch with platform_camera.h which i forgot in previous commit

Thanks for doing this. I've checked into the trunk in changeset 1833, with SKIP_AUTOBUILD set.

If someone with this camera can test confirm that it actually works to some extent, we could enable the autobuild. I'll post a binary in the development thread.

I was bit confused by the notes.txt, your post says it is untested, but the notes say somethings were tested. Also contradictory "some lua stuff" tested, and "load script = camera shutdown"

Anyway, I added a note that this is unfinished, and also that the modemap is incorrect.

Logged

Don't forget what the H stands for.

c10ud

245

Re: Adding new cameras, applying patches into trunk (with source code prepared)

« Reply #706 on: 29 / April / 2012, 10:52:30 »

Quote from: reyalp on 28 / April / 2012, 23:29:35

Quote from: c10ud on 26 / April / 2012, 10:54:03
chdk for ixus105_sd1300 firmware 100d only. see attachment for the patch.

This is completely untested since i do not own the camera anymore.

I ported the code from SDM (since Microfunguy ported it from my first chdk port and tested it extensively) to current chdk-trunk so it doesn't get lost and maybe it helps others (e.g. ixus107 port).

Since it compiles correctly and i trust finsig i added it as ALPHA, but feel free to remove it if you are not ok with it.

greets

edit: updated patch with platform_camera.h which i forgot in previous commit
Thanks for doing this. I've checked into the trunk in changeset 1833, with SKIP_AUTOBUILD set.

If someone with this camera can test confirm that it actually works to some extent, we could enable the autobuild. I'll post a binary in the development thread.

I was bit confused by the notes.txt, your post says it is untested, but the notes say somethings were tested. Also contradictory "some lua stuff" tested, and "load script = camera shutdown"
Anyway, I added a note that this is unfinished, and also that the modemap is incorrect.