New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

pixeldoc2000

356
IXUS900Ti 1.00C, IXUS300HS 1.00D

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #30 on: 04 / August / 2011, 15:55:26 »

Advertisements

Awesome stuff philmoz, very handy!
This will save us a lot of time and headache if it work reliable with all dumps.

Tested it on ixus300_sd4000.
finsig2 found 3 errors in my port...

Logged

Canon IXUS 900 / SD 900 Port | Canon IXUS 300 / SD 4000 Beta | GoPro HD Hero

reyalp

13938

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #31 on: 04 / August / 2011, 23:58:38 »

Works fine for me on D10. A540 (vxworks) also continues to build and work fine.

I don't see much reason not to go ahead with this.

Quote from: waterwingz on 03 / August / 2011, 09:25:28

My confusion is about the temporary entries in stubs_entry_2.S that you mention above. If the new sigfinder wants to use a different entry in stubs_entry.S than that found by the original sigfinder, does is put that new entry into stubs_entry.S and then an override to the old address in stubs_entry_2.S ? That would allow somebody "maintaining" the port to decide whether to start using the new address by simply deleting the entry in stubs_entry_2.S.

Yup, that's the idea.

Quote

UPDATE : took a look through the patch. I think the answer to my question is that the executable change but only because some of the addresses are hooked through NHSTUB rather than NSTUB macros. So I'd say - thumbs up, lets go.

One other possible issue that occurred to me is that a few ports override functions in lib.c rather than a stubs_entry_2.s stub or nullsub (for reasons that escape me, if they ever made sense in the first place). However, if this happens it should cause a duplicate symbol compile error rather than subtle breakage, so that would be OK anyway.

Logged

Don't forget what the H stands for.

msl

1280
A720 IS, SX220 HS 1.01a

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #32 on: 05 / August / 2011, 04:08:44 »

A first interim report for CHDK-DE:

With a small marginal change the patch works. Changeset 1234 is not yet included in CHDK-DE. At the moment Tools/Makefile needs some changes.

I have compiled some VxWorks and DryOS cameras - no problems. My A720 & SX220 works fine.

Really good work. Many thanks for it.

msl

Logged

CHDK-DE: CHDK-DE links

philmoz

3445

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #33 on: 05 / August / 2011, 06:01:55 »

Thanks for the feedback everyone.

Attached are updated patches.
- Included SX130 and IXUS300 for CHDK
- Fixed tools/Makefile for CHDKDE

I've included the relevant changeset number that the patch is against to avoid confusion.

Phil.

new_signature_system_chdk_1268.zip (167.51 kB - downloaded 73 times.)

new_signature_system_chdkde_732.zip (184.32 kB - downloaded 67 times.)

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

philmoz

3445

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #34 on: 12 / August / 2011, 03:57:53 »

If there are no objections I will commit this to the CHDK SVN over the weekend (13 & 14 Aug).

Phil.

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

JMFcanon

2

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #35 on: 12 / August / 2011, 19:35:07 »

The SX20 CHDK wiki page (http://chdk.wikia.com/wiki/SX20) has a few links for firmwares but none seems to be working. At box.net I could only find v1.00f and that one was only 4MB...

So I had a firmware dump from my camera (SX20 v1.02d) created some time ago and uploaded on mediafire.
This is the link http://www.mediafire.com/?1y1nb99xcrbg783, I also put it in the firmware section of the SX20 wiki page.

Logged

waterwingz

12134

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #36 on: 13 / August / 2011, 00:23:34 »

Quote from: philmoz on 12 / August / 2011, 03:57:53

If there are no objections I will commit this to the CHDK SVN over the weekend (13 & 14 Aug).

Phil.

Works for me. Looking forward to it.

Logged

Ported : A1200 SD940 G10 Powershot N G16

reyalp

13938

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #37 on: 13 / August / 2011, 00:41:27 »

Quote from: philmoz on 12 / August / 2011, 03:57:53

If there are no objections I will commit this to the CHDK SVN over the weekend (13 & 14 Aug).

Sounds good to me

Logged

Don't forget what the H stands for.

philmoz

3445

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #38 on: 13 / August / 2011, 03:14:55 »

Added in changeset 1291.

Phil.

Attached is also a patch for CHDK-DE trunk 748.

new_signature_system_chdkde_748.zip (255.47 kB - downloaded 70 times.)

« Last Edit: 13 / August / 2011, 05:27:54 by philmoz »

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

waterwingz

12134

Re: New stubs/signature finder (gensig2/finsig2) for DryOS cameras.

« Reply #39 on: 20 / August / 2011, 18:36:44 »

@philmoz : What decides which signatures the sigfinder puts into stubs_entry.S ? I'm trying to add GetImageFolder() to the G10 port. The G12 port has an address in stubs_entry.S but the G10 does not. How does that work ?

Logged

Ported : A1200 SD940 G10 Powershot N G16