time lapse for the camera for CHDK firmware 1.02A G10?.
Beta 1 works as expected with version 1.04A!
re: 1.04A Beta 2ceverything seem to work although..-can not start in "playback" mode ( blue light -> on/off light-> powershot screen-> green light-> shutdown)-can not switch from "shoot" mode to "playback" mode (camera shuts down + lens does not retract)-lens does not retract on shutdown (when pressing on/off)-lens subsequently retracts by pressing either "playback" or "on/off" (then promptly shuts down)
Quote from: vicentvalentia on 31 / July / 2011, 08:16:36time lapse for the camera for CHDK firmware 1.02A G10?.This will be possible using scripts once the porting process is complete.
I've found a different problem in my version. When I swtich on the camera in shooting mode (pressing the on/off switch) it start in playback mode. I've to half-press my the shutter button to switch it to shooting mode.
P.s. Waterwings, with Beta2B have you removed the function to start the camera without CHDK by holding for 2-3 sec the on-off button ?
When I use the 16gb card I cant' see the chdk logo during startup (but that is only a nuisance)
-can not start in "playback" mode ( blue light -> on/off light-> powershot screen-> green light-> shutdown)-can not switch from "shoot" mode to "playback" mode (camera shuts down + lens does not retract)-lens does not retract on shutdown (when pressing on/off)
@matto : did you experience the same behavior with beta1 as with beta 2 ?
G10 Beta 2c special for firmware 1.04aLet me know how that works out ?
No problem with Beta1, behaving as expected.. QuoteG10 Beta 2c special for firmware 1.04a..not much luck i'm afraid:-on/off (blue light->on/off light ->powershot screen -> shut down)-[>] (blue light->on/off light ->powershot screen -> shut down)
G10 Beta 2c special for firmware 1.04a
And if I re-read your earlier comment about beta 2c, the only CHDK mode you can use is shooting mode ?UPDATE : Please excuse my asking this, but is there any chance you are using the wrong firmware version ?
The problem seems to be something to do with partitions on the SD card?Have been using a 16GB partitioned Card ( fat16 / fat32) (diskboot.bin in fat16 and CHDK folder in both)..But.. with another 2GB SD card (fat16) and NO partition.. ALL 1.04A versions work as expected!
Started by rossim80 CHDK Releases
Started by waterwingz « 1 2 ... 54 55 » DryOS Development
Started by philmoz « 1 2 ... 28 29 » CHDK Releases
Started by philmoz « 1 2 ... 13 14 » CHDK Releases
Started by philmoz « 1 2 ... 7 8 » DryOS Development