CHDK for the G10 : Beta Testing : - page 7 - CHDK Releases - CHDK Forum
« previous next »
Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 13   Go Down

CHDK for the G10 : Beta Testing :

  • 126 Replies
  • 69402 Views
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: CHDK for the G10 : Beta Release Testing
« Reply #60 on: 21 / August / 2011, 09:54:27 »
Advertisements
Quote from: hanibal on 21 / August / 2011, 08:34:00
Thanks for your reply, but I'm so amateur and my English is too bad. I don't know what is the "SD Card Lock" booting only? How to active that mode? And how to start CHDK mode? I'm using 4Gb SD Card at Fat32, should I format it to Fat16?
Again,  you really should take a look at the explanation about SD card booting that I posted the link for.  I will not simply retype that information here :  http://chdk.wikia.com/wiki/Bootable_SD_card

To answer your question,  you should format your 4G card as FAT16.  You do not need to create two partitions as suggested by  altero unless your card is bigger than 4G ( i.e. 8G, 16G etc ).   And you can use the SDMinst.exe or CardTricks.exe from Windows - I prefer SDMinst.exe.  The instructions are also availabel at the link I reposted here.

Update : There is a lot to learn about CHDK.  You can ask questions here on the forum,  but it might help you ask better questions that will get you good answers  if you can read some of these guides - google translate might help ?

http://chdk.wikia.com/wiki/CHDK_for_Dummies
http://chdk.wikia.com/wiki/File:CHDK_Installation_Guide.pdf
http://chdk.wikia.com/wiki/CHDK_User_Manual
http://chdk.wikia.com/wiki/Downloads

« Last Edit: 21 / August / 2011, 10:00:13 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline altero

  • *
  • 15
    • altero
Re: CHDK for the G10 : Beta Release Testing
« Reply #61 on: 21 / August / 2011, 11:35:00 »
Quote from: olf on 20 / August / 2011, 21:35:28
How many bad pixels do you have?

Would you please be so kind to post your numbers?
My count is 8400, and I would like to have a comparison. Thanks.
On my first try, without knowing what to do, I got about 3000.
Then, I disabled the flash and put the camera on a stable surface, and I got 10105 bad pixels. Might look a lot, but it really means about 0,067%.
Logged
*

Offline hanibal

  • *
  • 14
Re: CHDK for the G10 : Beta Release Testing
« Reply #62 on: 21 / August / 2011, 12:34:59 »
Quote from: waterwingz on 21 / August / 2011, 09:54:27
Quote from: hanibal on 21 / August / 2011, 08:34:00
Thanks for your reply, but I'm so amateur and my English is too bad. I don't know what is the "SD Card Lock" booting only? How to active that mode? And how to start CHDK mode? I'm using 4Gb SD Card at Fat32, should I format it to Fat16?
Again,  you really should take a look at the explanation about SD card booting that I posted the link for.  I will not simply retype that information here :  http://chdk.wikia.com/wiki/Bootable_SD_card

To answer your question,  you should format your 4G card as FAT16.  You do not need to create two partitions as suggested by  altero unless your card is bigger than 4G ( i.e. 8G, 16G etc ).   And you can use the SDMinst.exe or CardTricks.exe from Windows - I prefer SDMinst.exe.  The instructions are also availabel at the link I reposted here.

Update : There is a lot to learn about CHDK.  You can ask questions here on the forum,  but it might help you ask better questions that will get you good answers  if you can read some of these guides - google translate might help ?

http://chdk.wikia.com/wiki/CHDK_for_Dummies
http://chdk.wikia.com/wiki/File:CHDK_Installation_Guide.pdf
http://chdk.wikia.com/wiki/CHDK_User_Manual
http://chdk.wikia.com/wiki/Downloads



Thanks waterwingz & altero, I've got it, already! ^^
Now, it's time to test CHDK!
Wish our CHDK version will became a final version soon!!!!!!!!!
Logged
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: CHDK for the G10 : Beta Release 3 with complete CHDK functionality
« Reply #63 on: 24 / August / 2011, 23:50:19 »
Beta3 : Fully Functional CHDK for the Canon G10

The G10 beta test team has finished testing beta release 3 of CHDK for the G10. There are links to the downloads in the first post of this thread at :

 Beta 3 Download Post

This release has full CHDK functionality except where noted below.

Notes for this third release :

1) CHDK RAW & DNG formats are fully supported.  But if you have Canon RAW mode enable,  CHDK will disable its RAW & DNG formats. Also, before you post here that you cannot open the CHDK RAW files,  please read this : Wiki page about CHDK Raw and this Forum Thread about CHDK RAW

2) Motion detect scripts will work but fast motion detection is not yet enabled.

3) A list of know bugs can be found here : G10 CHDK Beta Test Bug List

4) This beta version only supports the "SD card lock" boot method.  The "firmware update" method is not available. If you are new to CHDK,  please read this wiki posting about preparing your SD card : http://chdk.wikia.com/wiki/Bootable_SD_card

Thank you to all the testers who tried the first three releases and reported back.  Particular thanks to knonaka, altero, JK4U, RayC, olf, Iormangund, lightfusegetaway and especially Ian for your detailed beta test reports.


« Last Edit: 27 / August / 2011, 00:07:30 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline hanibal

  • *
  • 14
Re: CHDK for the G10 : Beta Release Testing
« Reply #64 on: 25 / August / 2011, 04:13:00 »
Quote from: waterwingz on 24 / August / 2011, 23:50:19
Beta3 : Fully Functional CHDK for the Canon G10

The G10 beta test team has finished testing beta release 3 of CHDK for the G10. There are links to the downloads in the first post of this thread at Beta 3 Download Post

This release has full CHDK functionality except where noted below.

Notes for this third release :

1) CHDK RAW & DNG formats are fully supported.  But if you have Canon RAW mode enable,  CHDK will disable its RAW & DNG formats. Also, before you post here that you cannot open the CHDK RAW files,  please read this : Wiki page about CHDK Raw and this Forum Thread about CHDK RAW

2) Motion detect scripts will work but fast motion detection is not yet enabled.

3) A list of know bugs can be found here : G10 CHDK Beta Test Bug List

4) This beta version only supports the "SD card lock" boot method.  The "firmware update" method is not available. If you are new to CHDK,  please read this wiki posting about preparing your SD card : http://chdk.wikia.com/wiki/Bootable_SD_card

Thank you to all the testers who tried the first three releases and reported back.  Particular thanks to knonaka, altero, JK4U, RayC, olf, Iormangund, lightfusegetaway and especially Ian for your detailed beta test reports.




waterwingz, you're awesome! ^^
Thank you so much for your nice working! ^^
Logged
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: CHDK for the G10 : Beta Release Testing
« Reply #65 on: 27 / August / 2011, 00:12:04 »
55 downloads so far now that this is public - 1 comment (thanks hanibal)

feedback make these projects go - what works and what doesn't ....  (beta test team was great though - thanks to the crew)
« Last Edit: 27 / August / 2011, 09:26:09 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline matto

  • *
  • 6
Re: CHDK for the G10 : Beta Release Testing
« Reply #66 on: 27 / August / 2011, 04:05:45 »
amazing work waterwingz, truly appreciate your hard work.. and commitment to the g10! took a little while for me to work out you need to be out of <alt> mode in order for settings to take effect.. but that just meant reading the manual! (page 6!) i knew it would be something stupid and didn't dare ask..
now its up and running i'm happy to report all is working perfectly as expected..
thanks again.. you rock!
Logged
*

Offline Fozzy Vis

  • *
  • 2
Re: CHDK for the G10 : Beta Release Testing
« Reply #67 on: 27 / August / 2011, 04:47:37 »
Same here, a big thanks to Waterwingz. Have been regulary checking the chdk boards for over a year now hoping for a development like this...
Logged
*

Offline hanibal

  • *
  • 14
Re: CHDK for the G10 : Beta Release Testing
« Reply #68 on: 27 / August / 2011, 10:01:26 »
Keep going, guys! ^^
I wish I have enough photographer's skills to test our project! ^^
Logged
*

Offline NTwoO

  • *
  • 7
Re: CHDK for the G10 : Beta Release Testing
« Reply #69 on: 27 / August / 2011, 13:35:17 »
Thanks so much for the port! I'll play a bit with it and if I find anything that is not on the buglist, it will be reported.
Logged
Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 13   Go Up
« previous next »
 

Related Topics