I'll create a custom build, if you tell me your camera's exact firmware version.
powershot sx260hs with firmware 1.0.1 A
Quote from: facuver on 09 / September / 2013, 09:46:45powershot sx260hs with firmware 1.0.1 AOK, will do it in a few hours.
Attached. You don't need to call the previously mentioned event procedures, CHDK will do it after every play -> rec and rec -> play transition. I have also enabled "Lua native calls" due to your unusable menu button. I'll remove this build after a while.If you find it not working, please report it.
... but when i try to put in capture mode, shows me a lens error (without any code) and shutdown automatically.
i don't know what to do with the .diif file, i just put it in the root of sd
orrect me if I'm wrong, but that probably means that the camera can't start in record mode even without CHDK. I don't know what happened to that camera. If it fell down, it could be that an internal connection got loose (that might be relatively easy to fix), or, it could be that in addition to the IS issue, the lens is jammed too (etc.). We can't fix these kind of hw errors with software.
... i have the camera disarmed, wath i need is remove the lens, the IR filter and shoot with the sensor only. Is this possible?The lens is fine, but the flex to conect the motor is broken.
I see, that's a good reason.Well, your camera is new enough to also have an event procedure named "DisableLensError". Start the cam in play mode, and execute the following through chdkptp:Code: [Select].poke(0x3050,0)
Started by SpumCo
Started by tomuxzz
Started by HamiltonBrand
Creative Uses of CHDK
Started by sterr
DSLR Hack development
Started by RaduP
« 1 2 »
General Discussion and Assistance