open a DNG file - comes later
switch DNG and RAW off, chose interval.lua (5 sec. delay), switch camera off and on again. Go to record mode and start script: first shot takes ~15 seconds, second as usual, then it hangs. No RAW or DNG saved (but now, when I try to reproduce: also the first shot is normal)
A couple of questions about the RAW problem.1) Is the saved RAW image valid ? (i.e. can you open it with something ?) Alternatively, can you open a DNG ?2) Does DNG take one picture and hang too ?3) With CHDK loaded but RAW disabled, can you take a many pictures in a row (more than 5) ?TIA
Is the saved RAW image valid ? (i.e. can you open it with something ?) Alternatively, can you open a DNG ?
With CHDK loaded but RAW disabled, can you take a many pictures in a row (more than 5) ?
Okay - so it will only take two shots under script control ? But you posted earlier today that the intervalometer script posted by siak works properly. That means it takes more than two shots ?
Some scripts stop half way through, e.g. hdr, interval, motion. 1st start after boot = 2 shots, 2nd to 5th start = only 1 shot, 6th start = no shots (every-time I stopped the script after some time and restarted).
* Scripts: the problem with them is, seemingly, connected to function calls, so as "IS_...", "GET_..." etc. ; 'easy' scripts, as e.g. shoot, lotto don't show problems, while hdr and interval stop halfway through (and cause further problems with starting of scripts).(...)+++ sorry, eieruhr aka eggtimer doesn't function, but countdown, input, metronom, stopwatch do it.
The raw image is valid, both CRW and DNG. I use rawtherapee and digikam and they will open both. Darktable and Rawstudio will open the DNG but not the CRW.
It seems to be a valid image file: IrfanView loads and displays the image with the pin-cushion distortion. So this is actually the DNG file.
Shooting pics the normal way (by pressing the shutter button) is possible without restrictions.
in contrast, siak's script, which uses a restricted command set, takes as much pictures as you want.
press "shoot_half" sleep 800 release "shoot_half"
rem Intervalometer Script for ELPH 100 HS (IXUS 115 HS) by siak @title Intervalometer Script @param a Number of Shots (0 is Inf) @default a 0 @param b Interval (Minutes) @default b 0 @param c Interval (Seconds) @default c 5 @param d Interval (Minutes x10) @default d 0 @param e Interval (Seconds x10) @default e 0 @param f Auto focus (0 is Off) @default f 0 n=0 t=(b*600+c*10+d*60+e)*100 if a<1 then let a=0 if t<100 then let t=100 if f=0 then goto "off" else goto "on" :on press "shoot_half" sleep 800 release "shoot_half" set_aflock 1 :off n=n+1 if a=0 then print "Shot", n else print "Shot", n, "of", a shoot if n=a then end sleep t goto "off"
Oh - when the default.bas changes the CHDK-language to german, it prints "CHDK Sprache auf deutsch geäert" - please change this to "CHDK-Sprache nach Deutsch geändert" The bold part is important, the rest is a thing of taste (for me, that sounds and reads better)
so with a slight modification, does this version of his script still work ?(CODE...)shoot(...CODE)
> ( "...geäert") Sorry - this one is unrelated to the IXUS115 port and might need to be addressed over here : ...
It stops after 2 shots (first start), then after 1 shot and with the sixth start nothing happens. so as with the other standard scripts.
But... it seems, that - in the script - only the first auto-focus really focuses.
Started by Just.J
Started by siak
Completed and Working Scripts
Started by prider
General Discussion and Assistance
Started by rmackay9
« 1 2 ... 11 12 »
Started by 2frugal
General Help and Assistance on using CHDK stable releases