Some progress at last. Rewrote the boot.c and capt_seq.c code from scratch - modelled after the elph500 code. Its only for the 1.01b (and 1.01c) as nobody has come forward to work on the other models so far.ixus115_elph100hs-101b-1.1.0-alpha9dnw tested this last night and reports that RAW and DNG are now working. Several of the shooting issues he has been seeing are corrected too. Here are some questions though :1) dnw reports that every second JPG is massively overexposed when using DNG. The corresponding DNG images are fine. Apparently this is not a problem when just shooting RAW ?2) Can someone test whether script issues with shoot vs press "shoot_half"/press "shoot_full" problems are fixed ?
Do you have the alpha 9 for 1.01a?
The link to alpha 8 on the previous page was removed.
Quote from: Swithich on 05 / July / 2012, 18:51:16Do you have the alpha 9 for 1.01a? No. Or at least - not yet.After I got no feedback from people who download the 1.00c and 1.01a version I stopped working on them. I will go back to it at some point when I have a volunteer to test them (and yes .. you did volunteer to look at it this weekend ...I thank you for that) Figured my time was better spent fixing the raw buffer issue and testing on the 1.01b where I was getting feedback than porting to versions were I was not getting any feedback.QuoteThe link to alpha 8 on the previous page was removed.I've turned the 1.01a alpha 8 back on - https://www.box.com/s/a60c2e170fa50e4b0b6c. Not sure it does much for you though ... alpha9 is a complete rewrite.
Just leave a post when you start working on 1.01a again. I'll check the forums every few days to look for an update.
All together: you reached the alpha-omega-build!
You wrote: "alpha9 is a complete rewrite." - I thought, that it is some weeks of work? Not some thousand lines of code?
Something - found a bit disturbing (really little problem): after switching the camera on, I needed a second button press to switch to record mode. Now I found out, that it is enough to hold the power button pressed for ~ a second, and the camera switches on directly to record mode. - Fine!
Another thing, which is disturbing: 2 switches to change to <alt> mode. Is it possible to use the movie button (as example)? So when I press the movie button only short, it starts recording a movie, when I press it for e.g. half a second, the alt mode comes up. Or: menu button short = <alt> mode, menu button long = system menu.
Now, preset is "Video", but when I press short or long on the video button, always video recording starts (and Alt-mode on-off is still done with zoom-in+set).
"Display" is no extra button, but part of the ring around the Func/Set button, used for "down" in menus (image on expertreviews.co.uk). Pressing "down" does nothing, and I can't leave the Alt-mode now. "Playback ([>])" does the same: nothing and it's not possible to leave the Alt-mode. Oh - in the image: the red dot marks the video-button.
Started by Just.J
Started by siak
Completed and Working Scripts
Started by prider
General Discussion and Assistance
Started by rmackay9
« 1 2 ... 11 12 »
Started by 2frugal
General Help and Assistance on using CHDK stable releases