IXUS 115 HS / ELPH 100 HS request - page 47 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 42 43 44 45 46 [47] 48 49 50 51 52 ... 54   Go Down

IXUS 115 HS / ELPH 100 HS request

  • 538 Replies
  • 188746 Views
*

Offline waterwingz

  • ******
  • 12128
    • Waterwingz
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #460 on: 17 / September / 2012, 20:13:55 »
Advertisements
Quote from: 2face on 17 / September / 2012, 18:45:35
i thought CHDK would allow videos up to the 4gb-limit because of fat32, but my camera still stops at 9:59min in 720p/1080p quality. is there an option i didnt find or is there no override for the max. video length/filesize in CHDK for the Ixus115?
Sorry - no. One story is that Canon stuck that limit in to avoid the higher import duties charged on HD video recorders.

In any case, its technically possible to bypass but has seldom been done.   See these threads :

http://chdk.setepontos.com/index.php?topic=5691.msg72981#msg72981

http://chdk.setepontos.com/index.php?topic=6711.0


Update :   nafraf just pointed out on IRC that the ixus310 has the video time limit overrides built-in to its movie_rec.c code.   That cameras was released a couple of months after the ixus115 in 2011 so its quite possible a similiar patch could be added to the ixus115 code.  It will take someone with the knowledge to make the patch and somebody with the camera to test it out though.
« Last Edit: 17 / September / 2012, 21:42:00 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline nafraf

  • *****
  • 1308
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #461 on: 22 / September / 2012, 17:07:17 »
@2face
A version of CHDK for ixus115 1.01a with video time limit modification is in attachment.  Please test if it is working and report.
« Last Edit: 23 / September / 2012, 20:28:30 by nafraf »
Logged
*

Offline 2face

  • *
  • 11
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #462 on: 23 / September / 2012, 07:57:05 »
Hi nafraf, thanks for your work!

I added the "PS.FI2" from the latest beta to the attached files, without i couldn´t see the "Firmware Upgrade" option in playback mode.

Your version works, but here is still a 9:59 time limit. I didn´t find a new option in the CHDK menu, so i thought the limit override could be set as standard in your modification - right? Recording stops at 9:59 minutes with about 2,5GB filesize in FullHD.

There was also a problem with the optical zoom in video: "zoom in" did only work in the first seconds, "zoom out" never - but i never tested this feature before, so this could be a problem in other builds, too.
Logged
*

Offline srsa_4c

  • ******
  • 4450
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #463 on: 23 / September / 2012, 08:50:06 »
Quote from: 2face on 23 / September / 2012, 07:57:05
I added the "PS.FI2" from the latest beta to the attached files, without i couldn´t see the "Firmware Upgrade" option in playback mode.
The PS.FI2 file is for starting CHDK with the "firmware upgrade" menu. nafraf's version only contains DISKBOOT.BIN + the modules, etc, it needs to be started with the "bootable sd card" method.
After you extracted his archive to your card, and started with the firmware upgrade method, locate "Make card bootable" in the CHDK menu. You'll find it inside "Miscellaneous stuff" somewhere. Execute it, switch off the camera, protect the card with the write protection switch, put it back and switch on the cam. CHDK should start automatically.

Quote
Your version
You'll only see his version after you do what's written above.

http://chdk.wikia.com/wiki/Bootable_SD_card
Logged
*

Offline waterwingz

  • ******
  • 12128
    • Waterwingz
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #464 on: 23 / September / 2012, 09:55:15 »
Quote from: srsa_4c on 23 / September / 2012, 08:50:06
Quote from: 2face on 23 / September / 2012, 07:57:05
I added the "PS.FI2" from the latest beta to the attached files, without i couldn't see the "Firmware Upgrade" option in playback mode.
The PS.FI2 file is for starting CHDK with the "firmware upgrade" menu. nafraf's version only contains DISKBOOT.BIN + the modules, etc, it needs to be started with the "bootable SD card" method.
I've added this note because the difference between ps.fi2 and diskboot.bin files confused me a lot when I first started using CHDK.  Took me a while to realize that you could put either file on an SD card on its own and load CHDK as long as you used the right method to start it.  They don't need (or use) each other.

To clarify that a bit,  when CHDK software is compiled,  the exact same code is used to produce two different executable files.  Each file contains "CHDK" (i.e. the same compiled computer program) but they are formatted slightly differently to allow them to be loaded differently by the camera.  The ps.fi2 file can only be manually loaded by the "firmware update" method and the diskboot.bin file can only be automatically loaded by the"SD card lock" method.

So when you added a ps.fi2 file to nafraf's version,  you were in fact installing and then running the original code.  None of his changes were present in your testing.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline nafraf

  • *****
  • 1308
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #465 on: 23 / September / 2012, 10:13:28 »
Hi,
I post under development releases to forum, so I don't generate full version with PS.FI2 files.  In future posts I'll be clearer to avoid misunderstandings.  :)

Quote from: 2face on 23 / September / 2012, 07:57:05
There was also a problem with the optical zoom in video: "zoom in" did only work in the first seconds, "zoom out" never - but i never tested this feature before, so this could be a problem in other builds, too.
Zoom problem was reported in previous post.  Please test this new version, zoom out should work.   

PS.FI2 file was not generated, so you'll need to use the bootable SD-Card method to load CHDK.
« Last Edit: 23 / September / 2012, 20:29:21 by nafraf »
Logged
*

Offline 2face

  • *
  • 11
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #466 on: 23 / September / 2012, 14:16:03 »
thanks @all for the useful information - the SD-card is now bootable, i´ve started a new HD-recording a few seconds ago.
i tested the zoom in video mode - it works now, zoom in and zoom out. i will report in about 10 minutes... :)


edit: i´m using timelimit v1, zoom works.

update: with timelimitV1 (i hope it was) the limit was still active. i deleted all old CHDK files on the SD-card now and start testing v2...
« Last Edit: 23 / September / 2012, 14:27:11 by 2face »
Logged
*

Offline waterwingz

  • ******
  • 12128
    • Waterwingz
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #467 on: 23 / September / 2012, 14:31:49 »
Quote from: 2face on 23 / September / 2012, 14:16:03
edit: i´m using timelimit v1, zoom works.

update: with timelimitV1 (i hope it was) the limit was still active. i deleted all old CHDK files on the SD-card now and start testing v2...

What are you referring to when you say "timelimit" ?
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline 2face

  • *
  • 11
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #468 on: 23 / September / 2012, 14:33:34 »
the name of nafrafs zip-file
Logged
*

Offline waterwingz

  • ******
  • 12128
    • Waterwingz
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #469 on: 23 / September / 2012, 14:41:44 »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
Pages: 1 ... 42 43 44 45 46 [47] 48 49 50 51 52 ... 54   Go Up
« previous next »
 

Related Topics