IXUS 115 HS / ELPH 100 HS request - page 49 - DryOS Development - CHDK Forum supplierdeeply

IXUS 115 HS / ELPH 100 HS request

  • 538 Replies
  • 170012 Views
Re: IXUS 115 HS / ELPH 100 HS request
« Reply #480 on: 15 / October / 2012, 13:09:17 »
Advertisements
-The patch for the 10min video limit works.
-Long exposures are limited to 64sec and the camera continues as if you had instructed it to take a 64sec exposure, there are no entries in romlog.log

Re: IXUS 115 HS / ELPH 100 HS request
« Reply #481 on: 18 / October / 2012, 16:49:06 »
I've managed to fix the extra long exposure problem. The code for the extra long exposure mod was never called from exp_drv_task(), why i don't know.
I've replaced exp_drv_task() with the one from my firmware and now it works.
Tested with 1.01b and 1.01c
The modified capt_seq.c is attached

Re: IXUS 115 HS / ELPH 100 HS request
« Reply #482 on: 19 / October / 2012, 07:02:35 »
How do I implement this code to make it work?  :-[

Re: IXUS 115 HS / ELPH 100 HS request
« Reply #483 on: 19 / October / 2012, 07:25:04 »
You must recompile chdk with this .c file. Easiest way is to install chdk shell and copy the .c to trunk\trnk#\platform\ixus115...\sub\101b and 101c.
Or wait until someone more experienced releases a complete fw with this fix (and other patches like the video limit patch).

Regarding the fix, i think the original capt_seq routine was copied from 1.01a, and that something went wrong. Maybe the original capt_seq works on the 1.01a but i don't have that version in my shoe box of cameras ;)
Can someone with a 1.01a test long exposures over 64 seconds with the unpatched version of the autobuild server and report back?
If 1.01a works then with the modified capt_seq for 1.01b and 1.01c this patch could be included on the autobuild server.


Re: IXUS 115 HS / ELPH 100 HS request
« Reply #484 on: 20 / October / 2012, 10:46:30 »
plz can you say how to recompile chdk? and how to compile it back?

Re: IXUS 115 HS / ELPH 100 HS request
« Reply #485 on: 20 / October / 2012, 11:03:39 »
plz can you say how to recompile chdk? and how to compile it back?
Try this :  http://chdk.wikia.com/wiki/CHDK-Shell
Ported :   A1200    SD940   G10    Powershot N    G16

Re: IXUS 115 HS / ELPH 100 HS request
« Reply #486 on: 20 / October / 2012, 11:39:44 »
Thanks :) is it hard to make CHDK firmware?

Re: IXUS 115 HS / ELPH 100 HS request
« Reply #487 on: 20 / October / 2012, 11:43:39 »
Thanks :) is it hard to make CHDK firmware?
If you follow the instructions in the link I posted,  its not hard to compile your own version of CHDK.  You just have to carefully follow the instructions.   

However,  if you have no software development experience you might find some of those instructions confusing. You can post any questions you might have in a new thread (not here in the IXUS115 thread) and we will try to help you.

If you want to change how the CHDK firmware works, that's a lot harder and takes considerable software development experience or a lot of patience.  And sometimes it takes both.
 
Ported :   A1200    SD940   G10    Powershot N    G16


Re: IXUS 115 HS / ELPH 100 HS request
« Reply #488 on: 20 / October / 2012, 12:05:18 »
Thanks :) is it hard to make CHDK firmware?
If you follow the instructions in the link I posted,  its not hard to compile your own version of CHDK.  You just have to carefully follow the instructions.   

However,  if you have no software development experience you might find some of those instructions confusing. You can post any questions you might have in a new thread (not here in the IXUS115 thread) and we will try to help you.

If you want to change how the CHDK firmware works, that's a lot harder and takes considerable software development experience or a lot of patience.  And sometimes it takes both.
I have programming experience. But I can have undestanding problems becouse I am Russian. :) But it is a realy good practic for me. 8) And if I am making mistakes in writting let me know pliz)

Re: IXUS 115 HS / ELPH 100 HS request
« Reply #489 on: 20 / October / 2012, 12:42:10 »
I have programming experience. But I can have undestanding problems becouse I am Russian. :) But it is a realy good practic for me. 8) And if I am making mistakes in writting let me know pliz)
This is a very international forum - everyone attempts to get along and understands the need to be patient when working with people whose native language is not English.

Once you get going and have questions,  start a new thread over here : http://chdk.setepontos.com/index.php?board=6.0

Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics