G9 turn off LCD timelapse - Script Writing - CHDK Forum
« previous next »
Pages: [1]   Go Down

G9 turn off LCD timelapse

  • 6 Replies
  • 5664 Views
*

Offline dalf

  • *
  • 3
G9 turn off LCD timelapse
« on: 17 / September / 2011, 21:34:21 »
Advertisements
Hi guys,

I have a G9 since 3 years ago and I love it :)

Well, I installed CHDK and I would like to do some time lapse "movie".
I downlaoded the script "Time Lapse Photography" (found on this website) and it works really well.

I just want to modify it so that the LCD screen is off during I'm taking the picture (to save some battery).
First, in the Canon menu, I could disable the "preview" after taking a picture.

Then I check on Internet and I found :
A)
*set the shortcut to sleep
press "print"
sleep 150
release "print"

B)
set_backlight(0)

But after taking the first picture, the lcd screen turned on.

Do you guys have any other solution ?
Tks
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: G9 turn off LCD timelapse
« Reply #1 on: 17 / September / 2011, 21:58:36 »
Quote from: dalf on 17 / September / 2011, 21:34:21
Well, I installed CHDK and I would like to do some time lapse "movie".
I downloaded the script "Time Lapse Photography" (found on this website) and it works really well.

A link to where you got that script from would be helpful here.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline reyalp

  • ******
  • 14128
Re: G9 turn off LCD timelapse
« Reply #2 on: 17 / September / 2011, 22:00:33 »
If the G9 can turn the display off with the disp button (for shooting through the viewfinder) that should be the best option.  This turns off all the live view hardware in addition to the backlight, which saves a significant amount of power. Most cameras with an optical viewfinder can do this. Turning off the backlight alone doesn't actually save much.

If not, you can turn the display off after every shot, or simply set the canon sleep interval to something very short. If you are doing thousands of shots, this might not be good for the backlight hardware (if it is CCFL based, I don't know)

Plugging something into the av port will also turn off the display, but again, this doesn't actually save much power. On cameras where the AV port isn't combined with the USB, this can be any non-conductive item that fits, there's a mechanical switch in the plug.
Logged
Don't forget what the H stands for.
*

Offline dalf

  • *
  • 3
Re: G9 turn off LCD timelapse
« Reply #3 on: 17 / September / 2011, 22:12:46 »
Thanks you for your answers.

Quote
A link to where you got that script from would be helpful here.
This script :
http://chdk.wikia.com/wiki/UBASIC/Scripts:Time_Lapse_Photography

Quote
If the G9 can turn the display off with the disp button (for shooting through the viewfinder) that should be the best option.
Yes, with the "disp" button I can turn off the display. But when the script starts, after the first picture, the display will turn on again.

Quote
you can turn the display off after every shot
A little bit difficult because I would like to take many pictures while riding my bicycle ;)

The only solution would be to insert something into the AV port ? Now I don't have the cable but I'll try that.

Logged
*

Offline reyalp

  • ******
  • 14128
Re: G9 turn off LCD timelapse
« Reply #4 on: 17 / September / 2011, 22:20:31 »
Quote from: dalf on 17 / September / 2011, 22:12:46
Thanks you for your answers.
Quote
If the G9 can turn the display off with the disp button (for shooting through the viewfinder) that should be the best option.
Yes, with the "disp" button I can turn off the display. But when the script starts, after the first picture, the display will turn on again.
That's strange, my a540 leaves the display off. Maybe there is a setting for this somewhere ? Maybe on the more expensive models there's a sensor to see if your face is next to the OVF ? If that's the case, you might be able to cover it.

edit:
If you are using the second version of the script, it clicks display every shot, which isn't likely to be what you want. To turn the display off using that key from script, you need to know which mode the camera is in. You can get this from a propcase: http://chdk.wikia.com/wiki/PropertyCase but in your case, just turning it off before starting the script should be fine.

It really wouldn't make sense for the canon firmware to turn on the display after each shot, and the g9 manual makes no mention of this.
Quote
Quote
you can turn the display off after every shot
A little bit difficult because I would like to take many pictures while riding my bicycle ;)
I meant in the script. You could also have the script press the disp button after each shot.
« Last Edit: 17 / September / 2011, 22:32:03 by reyalp »
Logged
Don't forget what the H stands for.
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: G9 turn off LCD timelapse
« Reply #5 on: 17 / September / 2011, 22:26:05 »
Quote from: dalf on 17 / September / 2011, 22:12:46
This script :
http://chdk.wikia.com/wiki/UBASIC/Scripts:Time_Lapse_Photography
The second script on that page show how you can use the Display button to turn off the display between shots.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline dalf

  • *
  • 3
Re: G9 turn off LCD timelapse
« Reply #6 on: 17 / September / 2011, 22:45:21 »
Quote
If you are using the second version of the script, it clicks display every shot, which isn't likely to be what you want. To turn the display off using that key from script, you need to know which mode the camera is in.
Quote
The second script on that page show how you can use the Display button to turn off the display between shots.

AH ! Thanks you very much !

Now it's working.
1) I removed the line : click "display" from the script
2) I turn off the display using "disp" button.
3) start the script

Thanks again for your help and your quick reply :)
I'm really happy. Now I'll try to make a good mount to put on my bike!
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal