philmozCan you add a function mapping the accurate distance for manual focus?Like it was done for the approximation.
Hopefully this is the appropriate way to report this:It seems that the override values (or at least one) is not followed when something is mounted in the hot shoe. Simply removing the item (a red dot sight in my case) from the hot shoe will allow the overrides to work. Even with the hot shoe filled the display still shows the override values (both via CHDK overlays and the Canon originals). I believe I saw reference to this having been an issue on the G9. Note that the red dot sight does not make any contact with the terminals but would trigger the microswitch under the right hand hot shoe spring.I have observed this on both 100i-1688 full and 100i-1798 full.
Quote from: jhoneao on 02 / April / 2012, 17:36:09would be great to use the flash continuously while using the high speed burst, it is possible?thanks, i'm new in this, so i'd like to learn.I have not seen anything specific to CHDK that would support this. Probably because you can't change the basic laws of physics - the camera's flash circuitry needs time to charge between each flash operation. Large flash units for DSLR cameras that control the length of each flash burst might be capable of taking many shots but the ones on my most P&S cameras pretty much discharge completely on each shot and need a recharge interval.
would be great to use the flash continuously while using the high speed burst, it is possible?thanks, i'm new in this, so i'd like to learn.
ROM:FF15459C _srRegDump ; DATA XREF: sub_FF154A78oROM:FF15459C ; ROM:off_FF154A84oROM:FF15459C STMFD SP!, {R4-R6,LR}ROM:FF1545A0 ADR R0, aSvtReg ; "\nSVT reg\n"ROM:FF1545A4 BL sub_FF00179CROM:FF1545A8 LDR R5, =0xD02C3000ROM:FF1545AC MOV R4, #0ROM:FF1545B0ROM:FF1545B0 loc_FF1545B0 ; CODE XREF: _srRegDump+2CjROM:FF1545B0 ADD R1, R5, R4,LSL#2ROM:FF1545B4 LDR R2, [R1]ROM:FF1545B8 ADR R0, a0x08x0x08x ; "[0x%08X] 0x%08X\n"ROM:FF1545BC BL sub_FF00179CROM:FF1545C0 ADD R4, R4, #1ROM:FF1545C4 CMP R4, #0x10ROM:FF1545C8 BCC loc_FF1545B0ROM:FF1545CC ADR R0, aHvtReg ; "\nHVT reg\n"...
ROM:FF1548E0 aSmartreflex_c DCB "SmartReflex.c",0
This is all brand new to me, but Computers (Macs) and Cameras are not. I just updated my old Canon SX1 and got a CanonSX40HS, and only did that because someone told me about this software I could use that would allow me to shoot in Raw. However, I've been all over the place in the CHDK info, tried various manual methods to load and install my version (1.00i), but CANNOT get a menu item called Firm Update to come up. I've searched all menus. And yes, I'm starting camera in Review/Playback mode. I hope someone can help, otherwise anyone want a SX40HS cheap? Thanks, Dave
Started by ERR99 Firmware Dumping
Started by samdgt « 1 2 » RAW Shooting and Processing
Started by Thiws87 General Help and Assistance on using CHDK stable releases
Started by radioman193 General Help and Assistance on using CHDK stable releases