supplierdeeply

port for A3300IS / what reference port to use?

  • 288 Replies
  • 22499 Views
  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #240 on: 30 / January / 2012, 19:16:26 »
    Advertisements
    Oh my God! I made it Sir!Thank you so much for the Instruction! Godbless! Are the one sir who port 3300?

  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #241 on: 30 / January / 2012, 23:10:00 »
    Oh my God! I made it Sir!Thank you so much for the Instruction! Godbless! Are the one sir who port 3300?
    yes, i ported this one, and no prob, glad u got it working?

  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #242 on: 01 / February / 2012, 20:38:51 »
    Oh my God! I made it Sir!Thank you so much for the Instruction! Godbless! Are the one sir who port 3300?

    how did u get it to work? i used cardtricks for format my 2gb card fat16.. then copied the files from the zip to the card.. but i cant seem to get it to work.. i didnt make it 'bootable' am i supposed to do that? i checked the 'readme' file and tried everything.. any help greatly appreciated..

  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #243 on: 01 / February / 2012, 21:18:16 »
    Oh my God! I made it Sir!Thank you so much for the Instruction! Godbless! Are the one sir who port 3300?

    how did u get it to work? i used cardtricks for format my 2gb card fat16.. then copied the files from the zip to the card.. but i cant seem to get it to work.. i didnt make it 'bootable' am i supposed to do that? i checked the 'readme' file and tried everything.. any help greatly appreciated..
    yes,u have to make it bootable, and to make it load when your prepare card and copy the diskboot.bin and chdk folder to the card you have to put sdcard in lock mode to boot into chdk, dont worry, it will still be writeable during chdk even though its locked.

    make sure your using the correct firmware version as well, so far I have ported 100a and 100d, I just recieved dump for 100c which i will port most likely tomorrow, I am homeschooling my daughter so time is scarce, but it should only take a bit to port it once i start.


  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #244 on: 02 / February / 2012, 08:16:06 »
    [yes,u have to make it bootable, and to make it load when your prepare card and copy the diskboot.bin and chdk folder to the card you have to put sdcard in lock mode to boot into chdk, dont worry, it will still be writeable during chdk even though its locked.

    make sure your using the correct firmware version as well, so far I have ported 100a and 100d, I just recieved dump for 100c which i will port most likely tomorrow, I am homeschooling my daughter so time is scarce, but it should only take a bit to port it once i start.

    that was it.. i put the SD card back in my reader to my pc.. opened cardtricks.. hit  'make bootable' and that was it.. only step i missed.. tried the intervalometer and it works :)

    Thanks again for all your hard work :)

  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #245 on: 02 / February / 2012, 19:52:45 »
    Here is the port for firmware 100c, can someone please test it to let me know if it works.

    Thanks adiszep for the dump.

    Update: version 100c confirmed working.
    « Last Edit: 04 / February / 2012, 04:46:03 by mk11174 »

    *

    Offline rudi

    • ***
    • 123
    • A590IS_101B, SX260HS_100B
  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #246 on: 05 / February / 2012, 10:12:16 »
    Hi mk11174, thank you for your work.

    Thanks adiszep for the dump.
    Would you the dump (a3300_100c) share with us?

    rudi

  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #247 on: 05 / February / 2012, 14:49:24 »
    Hi mk11174, thank you for your work.

    Thanks adiszep for the dump.
    Would you the dump (a3300_100c) share with us?

    rudi
    I am sharing it here: http://www.mediafire.com/file/ycrc5sc4p9a3aai/PRIMARY.BIN


  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #248 on: 09 / February / 2012, 02:12:00 »
    Update for anyone interested in using Face button to enter Alt mode instead of Disp+Set.

    Use long press to use Face button in normal way for camera.

    Also updated the color palette to fix up play mode colors.

    Colors not tested for 100C and 100D yet, but should be the same.

    Dont forget to delete the CFG file in the CHDK folder on SDCARD for color palette to work right.

  • Publish
    Re: port for A3300IS / what reference port to use?
    « Reply #249 on: 09 / February / 2012, 02:14:14 »
    Here is 100D update read last post for info on new update!

     

    Related Topics