ultrvalometer + motion detection sx10 is

dunk

« on: 05 / July / 2010, 02:15:39 »

Advertisements

I have gotten ultravalometer and motion detection to run seperately on sx10 is. I would like to combine these two in order to make time lapse of say a storm but still not miss any lightning strikes. Is this possible? Have searched to he best of my ability but this is a broad site.. thnks

Logged

reyalp

12737

Re: ultrvalometer + motion detection sx10 is

« Reply #1 on: 05 / July / 2010, 02:24:49 »

You can only run one script at a time. You could write a script which did both motion detection and interval shooting, but I'm not aware of one already written.

Logged

Don't forget what the H stands for.

jeandodge

Re: ultrvalometer + motion detection sx10 is

« Reply #2 on: 18 / July / 2011, 22:21:20 »

get two cameras....

Logged

thepanoguy

Re: ultrvalometer + motion detection sx10 is

« Reply #3 on: 19 / July / 2011, 00:19:53 »

Build yourself a lightning strike detector and use the script to control your camera:

http://www.techlib.com/electronics/lightning.html

If you want directivity you can modify a motion detector:

http://www.glolab.com/pirparts/infrared.html

Google for terms, lightning photography and lightning photography trigger, you will find a number of guides including commercial lightening detectors and some archived CHDK guides posted from other sources than the CHDK forum:

Some examples:

http://www.lightningphotography.com/tips.html
http://www.weatherscapes.com/techniques.php?cat=lightning&page=lightning
http://www.velocityreviews.com/forums/t543413-lightning-photography-chdk-with-mx3-motion-detection-a-strike-every-time.html
http://www.diyphotography.net/use-chdk-as-a-definite-lightning-rod-for-your-pictures
http://photography-on-the.net/forum/archive/index.php/t-657824.html
http://www.howtofixcomputers.com/forums/digital-photo/chdk-does-1-1-000-000-second-now-we-talking-205723-5.html

« Last Edit: 19 / July / 2011, 00:37:48 by thepanoguy »

Logged

toinech

Re: ultrvalometer + motion detection sx10 is

« Reply #4 on: 10 / October / 2011, 19:09:13 »

Quote from: dunk on 05 / July / 2010, 02:15:39

I have gotten ultravalometer and motion detection to run seperately on sx10 is. I would like to combine these two in order to make time lapse of say a storm but still not miss any lightning strikes. Is this possible? Have searched to he best of my ability but this is a broad site.. thnks

It looks like you may fin it here:
http://chdk.wikia.com/wiki/UBASIC/Scripts:_Multipurpose_Motion_Detection

you may need some modifications so that when the motion detection function exits on timeout you take a shot anyway before rearming it?
=> Changing the following line:

Code: [Select]

if a=1 and t>0 then shoot

Code: [Select]

if a=1 then shoot

Note: Your JPG to movie converter should be smart enough to use the time stamp within the JPG file to properly rebuild the timing for your MJPEG movie.

Toinech.

« Last Edit: 11 / October / 2011, 17:26:55 by toinech »

Logged