IXUS 230 HS - Porting Thread - page 14 - General Discussion and Assistance - CHDK Forum

IXUS 230 HS - Porting Thread

  • 168 Replies
  • 73471 Views
Re: IXUS 230 HS - Porting Thread
« Reply #130 on: 02 / August / 2012, 03:08:55 »
Advertisements
Unfortunately, I do not work. "Card locked" problem

*

Offline reyalp

  • ******
  • 14128
Re: IXUS 230 HS - Porting Thread
« Reply #131 on: 02 / August / 2012, 16:25:55 »
Unfortunately, I do not work. "Card locked" problem
If it shows card locked, this almost certainly means that you did not successfully make the card bootable.

If the card is set up correctly, then it should either boot CHDK or crash. An exception would be if the SD card lock bit were wrong, but this should not be the case since ports for other firmware versions already exist, and the hardware bits do not change between firmware revisions.
Don't forget what the H stands for.

Re: IXUS 230 HS - Porting Thread
« Reply #132 on: 03 / August / 2012, 11:30:19 »
Doesn't work! I tried all card bootable. SD card 2gb Camera IXUS 230 FW 1.00a  :(

I could use (A720) it successful (CHDK)

*

Offline nafraf

  • *****
  • 1308
Re: IXUS 230 HS - Porting Thread
« Reply #133 on: 03 / August / 2012, 19:54:59 »
Doesn't work! I tried all card bootable. SD card 2gb Camera IXUS 230 FW 1.00a  :(
Does camera freeze? or do you continue seeing Card-lock? Same behavior with both files?

I checked boot.c but I did not find error.
A new version is available as attachment. You can take the source code for 100a from this svn repository

« Last Edit: 12 / September / 2012, 19:50:11 by nafraf »

Re: IXUS 230 HS - Porting Thread
« Reply #134 on: 05 / August / 2012, 02:32:37 »
Very Thanks! This was successful!  :)

But now I have a problem the next: View of raw distortion fisheye effect

*

Offline reyalp

  • ******
  • 14128
Re: IXUS 230 HS - Porting Thread
« Reply #135 on: 05 / August / 2012, 03:08:03 »
But now I have a problem the next: View of raw distortion fisheye effect
This is normal, the lens on modern Canon P&S have lots of distortion, which Canon corrects in software when making the jpeg. Raw is what the sensor saw, without any correction. You can use software to correct it on your PC.
Don't forget what the H stands for.

*

Offline nafraf

  • *****
  • 1308
Re: IXUS 230 HS - Porting Thread
« Reply #136 on: 11 / August / 2012, 19:57:00 »
Very Thanks! This was successful!  :)

But now I have a problem the next: View of raw distortion fisheye effect

Hi, is every thing working with 100a firmware version?   Can I create a patch and submit it to official repository?


Re: IXUS 230 HS - Porting Thread
« Reply #137 on: 17 / August / 2012, 12:37:01 »
I'm really sorry about that. I haven't had access for the last couple weeks, and I'm about to get crazy busy with stuff soon so I wasn't/won't be able to help at all.

Thanks nafraf for doing so much work.

I feel horrible now.

Re: IXUS 230 HS - Porting Thread
« Reply #138 on: 14 / September / 2012, 09:08:34 »
Hi I am Hok.
I tried the 1.1.0-2143. I have follow the step in readme.txt but never works. I copy the e version. Copy it in root of my SDCARD. Boot in playback mode. Hold set and press down. Nothing happen. Best case it just same as only holding set which is displaying animation of current time. Is there anything wrong in what I am doing? Thank you.

*

Offline nafraf

  • *****
  • 1308
Re: IXUS 230 HS - Porting Thread
« Reply #139 on: 14 / September / 2012, 09:22:13 »
Hi, what is the firmware version of your cam?
Q. How can I get the original firmware version number of my camera?

 

Related Topics


SimplePortal © 2008-2014, SimplePortal