Menu display of current Custom curve name

an0n

152

« on: 04 / January / 2012, 20:10:20 »

Advertisements

I hope this might be a simple and do-able request, can the Custom curves menu be changed to show the name of the currently loaded Curve profile. ?

BTW, I'm using r1491 and the Games colors have been changed - have gone gray, possibly as far back as @1234 changes ? I used to be able to get them right by first entering the Canon menu, then going to ALT mode. I'ts only cosmetic, and not high priority but for completeness sake I mention it, I rarely use games.

Logged

A720IS.

toinech

105

Re: Menu display of current Custom curve name

« Reply #1 on: 04 / January / 2012, 21:10:02 »

Quote from: an0n on 04 / January / 2012, 20:10:20

I hope this might be a simple and do-able request, can the Custom curves menu be changed to show the name of the currently loaded Curve profile. ?

I though that was there day one when custom curve feature was created. I have it on my A610 (it was way back on release change number 400 ish.)

Logged

an0n

152

Re: Menu display of current Custom curve name

« Reply #2 on: 06 / January / 2012, 10:33:27 »

Yes, I have always appreciated your work on this, thanks toinech. Attached is a screenshot to illustrate what I'm
talking about, there is no indication of which profile is loaded, unlike the Load Scripts menu which shows the current script name.

Curves name.jpg (65.15 kB, 807x342 - viewed 116 times.)

Logged

A720IS.

msl

1280
A720 IS, SX220 HS 1.01a

Re: Menu display of current Custom curve name

« Reply #3 on: 06 / January / 2012, 12:53:25 »

This feature is already available in CHDK-DE. You must only add some lines in the menu part.

Code: [Select]

MENU_ITEM   (0x0 ,LANG_MENU_CURVE_CURRENT,              MENUITEM_SEPARATOR, 0,                  0 ),
MENU_ITEM   (0x0 ,(int)conf.curve_file,                 MENUITEM_TEXT,      0,                  0 ),
MENU_ITEM   (0x0 ,(int)"",                              MENUITEM_SEPARATOR, 0,                  0 ),

For LANG_MENU_CURVE_CURRENT you need also some additions in language part. But the first line is not necessary.

msl

Logged

CHDK-DE: CHDK-DE links

toinech

105

Re: Menu display of current Custom curve name

« Reply #4 on: 09 / January / 2012, 22:15:36 »

Thanks msl for the suggestion. This is much more efficient than the solution that I previously had - replacing the word 'Custom' with a truncated form of curve_file name. Hopefull some developper who has access can put that in.
I do not have access to update the code. I had to get the help of a member who have access.

toine

Logged