Propset 2 or Propset 3 for DIGIC 4

Pier

« on: 06 / January / 2012, 09:51:52 »

Advertisements

Hi all,
I've tested Bracketing and EV correction script from this link:
http://chdk.wikia.com/wiki/UBASIC/Scripts:_Bracketing_and_EV_correction,
on my SX130 IS (Firmware 1.01c) and CHDK version sx130is-101c-1.0.0-1528_BETA.zip
To get it working on my Cam with DIGIC 4 processor, I replased values in commands: get_prop, get_prop...p and set_prop with these for DIGIC 4 propset 3 - 107/209 and 210 (Shooting in progress).
After first shot camera feeze with image on LCD.No image on SD card.
Then I change values with 107/207 and 206 (DIGIC 3 - proset 2/3), but all 7 shots are equall- no difference in brightness e.t.c.
What I made wrong ? Any help please...

Thats because I'm playing for first time with scripts

============================
Btw with this 1528 version for SX130IS, CHDK menu and some CHDK parameters on LCD display when Disable override is off, flickering time to time..for a very short time.
This for info only.
Thanks in advance.

« Last Edit: 06 / January / 2012, 09:56:17 by Pier »

Logged

msl

1280
A720 IS, SX220 HS 1.01a

Re: Propset 2 or Propset 3 for DIGIC 4

« Reply #1 on: 06 / January / 2012, 13:11:54 »

The SX130 has propset 4.

The used script is a very old script from the early CHDK days.

For set_prop 25/26 you can use set_ev.

For get_prop 205 p you should use p=get_shooting

Read more about script commands: http://chdk.wikia.com/wiki/Script_commands

msl

Logged

CHDK-DE: CHDK-DE links

Pier

Re: Propset 2 or Propset 3 for DIGIC 4

« Reply #2 on: 06 / January / 2012, 17:24:55 »

msl,
Many thanks for the replay.I grab this script thinking it is simple, and I understood what's going on

Have made copy/paste of Your recommendation, will test it, and start to learn about Script's...
10x again.

Logged

Pier

Re: Propset 2 or Propset 3 for DIGIC 4

« Reply #3 on: 08 / January / 2012, 16:52:12 »

After msl introduced set_ev instead set_prop 25/26 and p=get_shooting instead get_prop 205 p, I've made some tests to finish with this.
1st Test: with above commands working fine.
Thanks msl !
2nd Test: I want to try propset 4 variables 107/211 (or 107/209) instead 25/26 and 210 instead 205.Script ran, take 7 shots (by default) and stop = OK, but no difference in brightness... seems some is wrong with these variables.I don't know what is problem during 2nd test.Maybe they are diferent for SX130 IS.I find they in CHDK -WIKI.
That's all.

Logged