New & orphan ports - what to do and when ? - page 2 - General Discussion and Assistance - CHDK Forum supplierdeeply

New & orphan ports - what to do and when ?

  • 13 Replies
  • 7596 Views
Re: New & orphan ports - what to do and when ?
« Reply #10 on: 21 / March / 2012, 18:29:22 »
Advertisements
- IXUS115 - work in progress; but code lost due to HD crash (not a lot we can do about this).
Been talking to Just.J - the person who did most of that port. He did not have a HD crash - that was somebody else doing a different f/w version based on his stuff.  His Alpha5 port is still available on the forum thread as a zip file.

Having said that,  there is still a major problem with that port in that it only saves a raw file the first time after each boot.   I sent Just.J a PM looking for more info - we will see what happens.  Will take the conversation back to the porting thread if we make any progress.

So, here's a patch file that would add the ixus115 to the current stable build.   It build and runs (at least Just.J confirms that the 1.00c f/w works) so I'll post here to avoid losing it.  If we can get the raw thing fixed then its probably worth adding as an ALPHA to the autobuild.

Ported :   A1200    SD940   G10    Powershot N    G16

Re: New & orphan ports - what to do and when ?
« Reply #11 on: 14 / July / 2012, 00:20:43 »
Cleanup effort on these has been really good.

Are we missing any others right now ?
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: New & orphan ports - what to do and when ?
« Reply #12 on: 14 / July / 2012, 07:58:57 »
Are we missing any others right now ?

What do you think about the ixus130 port?

porting thread
GitHub

msl
CHDK-DE:  CHDK-DE links

Re: New & orphan ports - what to do and when ?
« Reply #13 on: 14 / July / 2012, 10:00:30 »
What do you think about the ixus130 port?
Its interesting (i.e. good) that emlyn ran the project from github. He has binaries posted there too - maybe that's why nobody has been complaining in the forum ?

Looks like he has been gone almost a year from the forum.   I'll download the github code and see if it still builds on "stable".   If the output of finsig doesn't look too bad I'll convert to "dev" and we can maybe park it in the svn as "not for autobuild" unless we can get somebody to respond it the porting thread.

Update : conversion and rescue done.   Now it need a tester or two ...
« Last Edit: 14 / July / 2012, 19:01:18 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16


 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal