Focus and Infinity: wide and zoom - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

Focus and Infinity: wide and zoom

  • 9 Replies
  • 5255 Views
*

Offline dvip

  • ****
  • 451
Focus and Infinity: wide and zoom
« on: 13 / March / 2012, 12:31:29 »
Advertisements
This works in wide (A590IS 101b):

print("Focus to infinity")
set_focus(65535)
sleep(1000)
shoot()

But if I zoom and do that, it won't focus correctly.
Any way to make it work in zoom mode.

Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: Focus and Infinity: wide and zoom
« Reply #1 on: 13 / March / 2012, 14:37:36 »
Quote from: dvip on 13 / March / 2012, 12:31:29

Any way to make it work in zoom mode.

What happens if you add a half-press and delay before set_focus ?
Logged
*

Offline dvip

  • ****
  • 451
Re: Focus and Infinity: wide and zoom
« Reply #2 on: 13 / March / 2012, 19:38:24 »
I tried this, Microfunguy, and it works when I first turn the camera on:

print("Infinity")
press("shoot_half")
sleep(2000)
set_focus(65535)
sleep(2000)
shoot()

Now after I use the camera and focus someplace else and run the script again it won't focus, all blur as if it switched to macro mode.

I turn the camera off, then on, and run it again and it works.

I am just trying to shoot with focus set at infinity when at wide or full zoom.

Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: Focus and Infinity: wide and zoom
« Reply #3 on: 13 / March / 2012, 20:20:19 »
I have not studied the CHDK code but the focus override is probably applied during half-press.
I don't know if 'shoot' includes a half press.

Whatever, insert a half-press and delay in your code AFTER setting focus.
Remove the previous half-press.
Logged
*

Offline dvip

  • ****
  • 451
Re: Focus and Infinity: wide and zoom
« Reply #4 on: 13 / March / 2012, 21:05:58 »
The latest variation but no luck:

  print("Infinity")
  set_focus(65535)
  sleep(2000)
  press("shoot_half")
  sleep(2000)
  shoot()

And when I switch to manual focus to check where it is at, it's a 20 inches :( not infinity.

Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: Focus and Infinity: wide and zoom
« Reply #5 on: 13 / March / 2012, 21:11:21 »
According to the CHDK code the A590 can override focus when the camera is NOT in manual focus mode.

Nevertheless, try that last script with camera in manual focus mode.
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: Focus and Infinity: wide and zoom
« Reply #6 on: 13 / March / 2012, 21:23:26 »
@dvip
I think you either need to use shoot() alone or do the whole shooting action with keypresses and releases.
press("shoot_half")
press("shoot_full")
release("shoot_full")
release("shoot_half")
with the appropriate delays between them. See shoot.lua in the standard CHDK distribution.
For set_focus() try -1 as argument.

edit:
If your camera supports that, you may try to do set_aflock(1) before set_focus(). MF mode consumes a bit more energy :) at least on my camera(s).
« Last Edit: 13 / March / 2012, 21:32:38 by srsa_4c »
Logged
*

Offline dvip

  • ****
  • 451
Re: Focus and Infinity: wide and zoom
« Reply #7 on: 13 / March / 2012, 21:26:59 »
@Microfunguy,
Yes, when in manual focus mode it does work.
I just don't see why set_focus(65535) won't override focus to infinity when not in manual focus mode at full zoom.

@srsa_4c,
I'll experiment with that.

Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: Focus and Infinity: wide and zoom
« Reply #8 on: 14 / March / 2012, 07:09:54 »
Incidentally, to have 'infinity' in focus you do not need to focus at 65535.

At wide angle, if you focus to a few metres infinity will be in focus.
At maximum optical telephoto, some tens of metres will be ok.

Try 30000 or 40000.
Logged
*

Offline francoisdp

  • *
  • 2
Re: Focus and Infinity: wide and zoom
« Reply #9 on: 19 / June / 2013, 16:28:42 »
@Microfunguy
I have tried to implement the code that you suggested before and I have the following implementation, but I still get feedback that the focus changes.  I need to have constant focus at infinity.

Code: [Select]
set_prop 6 4
 sleep 20
 a = get_prop 6
 print "Focus mode =" a
  print "Infinity"
  set_focus 65535
  sleep 2000
  press "shoot_half"
  sleep 2000
  shoot
f = get_focus
print "Focus =" f
sleep 2000

I also tried to directly set the mode to infinity (set_prop 6 3), but that did not work either.  Can you assist?  I am using an A810.

Francois
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal