edit: I tried the version from autobuild. Same problem there.
When I try to boot with the firmware update, the camera just shuts down.
Some comments. I followed the installation instructions very closely however I could not get the firmware to load via the update firmware menu, so I cannot set the card to be bootable.
However, when I 'lock' the card I can start the camera via the play button and then pressing the shutter opens the lens and takes it into shooting mode.
ok, I ran through the process again just to be sure.When attempting to load chdk using the firmware update option. After selecting firmware update it presents a screen that says 1.0.0.0 to 1.1.0.0, and I press OK. After that the screen just goes blank. nothing. pressing the play button brings it back to life.I then used EOScard1.2 to make the card bootable and 'locked' the card. Now, the camera will only start in play mode (using either on/off button or the play button) but pressing the shutter will then put it into camera mode. pressing play then activates chdk as normal and i can open the chdk menu.Does that help?
Started by Brando Script Writing
Started by mv3830 General Chat
Started by x3oo General Help and Assistance on using CHDK stable releases
Started by hiker_jon Firmware Dumping
Started by ironsting Feature Requests