S100 porting thread - page 10 - DryOS Development - CHDK Forum  

S100 porting thread

  • 286 Replies
  • 108064 Views
Re: S100 porting thread
« Reply #90 on: 13 / May / 2012, 10:58:17 »
Advertisements
Thanks! That is exactly what I needed.   I submitted it to the patch thread with thanks given to you for preparing the patch file :)

Re: S100 porting thread
« Reply #91 on: 15 / May / 2012, 14:29:00 »
Hey guys,

I'm very interested in contributing and helping test this. However I'm getting nowhere getting this installed!  ???

When trying to check the firmware installed using the Play, then Set + Disp buttons I get nothing but the clock. I have vers.req on my formatted 2GB card.

Even if I go to look for the Firmware Update menu item, it's not there. I tried pressing Play button twice as per the Readme with no joy.


Any anyone got S100 specific step-by-step instructions to get this loaded?

Thanks!

Re: S100 porting thread
« Reply #92 on: 15 / May / 2012, 14:34:23 »
Take a look at this :  http://chdk.wikia.com/wiki/Prepare_your_SD_card

You probably want to pay particular attention to the part about using the Acid application to determine your firmware version.

Ported :   A1200    SD940   G10    Powershot N    G16

Re: S100 porting thread
« Reply #93 on: 15 / May / 2012, 22:33:50 »
I just prepared  a quick guide for this camera :)

Any anyone got S100 specific step-by-step instructions to get this loaded?

Thanks!

It is the step by step you were looking for

http://chdk.wikia.com/wiki/CHDK_quick_install_Guide


Re: S100 porting thread
« Reply #94 on: 16 / May / 2012, 17:57:34 »
Thanks for your hard work guys.  I had a s95 that I used for time lapse until sand killed it. 

It was a task to get the 16GB SD card bootable, partitions did not work.  HDHacker and xvi32 worked, however.

Appreciate the work you guys are putting into getting this out.

Re: S100 porting thread
« Reply #95 on: 17 / May / 2012, 00:07:36 »
What would it take to make this a BETA build?

It seems pretty stable and most of the issues seem to be minor in my opinion.
The only big issue I can think of is maybe the movie override quality.

Here are the issues below.  I just have no idea where to start.....if I can attack this at all. 

I have seen some of the disassembled dump.  :o

How do you guys find anything in there?
I think I need to go back to a school for this...haha

From Notes.txt
Quote
CAMERA TODO/KNOWN ISSUES:
- manual loading with "firm update" loading crashes (confirmed on 100d and 101a), so PS.FI2 is not included in the autobuild. (to be fixed soon http://chdk.setepontos.com/index.php?topic=7889.msg85060#msg85060)
- various defines in platform_camera.h needs to be checked
- value for SleepTask in kbd.c instead of hardcoded 10 (minor issue)
- values for Jogdial events in lib.c

- 100d, 100e, 101a: movie override quality seems to be working but values might be wrong (stock Canon reaches 4MB/s, CHDK quality 99 2MB/s)
- 100d, 100e, 101a: jogdial is untested and needs correct rear_dial_position address in stubs_min.S

*

Offline c10ud

  • ***
  • 245
Re: S100 porting thread
« Reply #96 on: 17 / May / 2012, 05:02:06 »
Quick comments:
Just note i've been wrong with the PS.FI2 issue, it's been found it's not the same as SX260HS so it's not "easy" nor "soon".
The defines must be checked with features and so far they turned out pretty good.
The value for SleepTask is a non-issue.
Jogdial values/rear dial position: unknown and untested.. (and useless?)

Movie override quality is interesting though, even if i wonder if overriding quality is needed..

Re: S100 porting thread
« Reply #97 on: 17 / May / 2012, 10:52:18 »
I would personally like to know the LED address for the AF led.....I have no idea how to look for it though.

I also think we should update the note.txt removing SleepTask and platform_camera.h

The rear Jogdials don't seem to have a use right now......but in the future you never know.

Last is how do we verify if we need movie override quality setting?

edit:

quick question I keep getting unable to split patch.txt in chdk shell when trying to make diff......anybody ever get that?
« Last Edit: 17 / May / 2012, 11:08:15 by colon247 »


*

Offline ADamb

  • **
  • 65
  • sx200is
Re: S100 porting thread
« Reply #98 on: 17 / May / 2012, 15:04:58 »
sx200is 100c
Full display EdgeOverlay if CHDK in EXMEM.
SCREEN_COLOR to 15 (was white in playback mode).
SX200 IS-100C

Re: S100 porting thread
« Reply #99 on: 17 / May / 2012, 15:29:10 »
quick question I keep getting unable to split patch.txt in chdk shell when trying to make diff......anybody ever get that?
I gave up on the CHDK-Shell diff function some time ago.  Maybe whim has improved it since but I now use Tortoise_svn (on windows)  or svn command line (on Linux) to get the latest source versions,  edit those and then use the built-in patch functions to make patch files.

« Last Edit: 17 / May / 2012, 15:30:52 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics