Does any of the current work on CHDK for the S100 lend itself to forcing TTL flash in Manual metering mode? This is a *very* desirable feature for using the S100 in underwater strobe photography. There is a script available for the S95 CHDK, but as the S100 has a different processor it won't work as-is.
Note that the first post on that page has his original script, but he posted an update partway down, and the link above should take you there.
Replying to myself: Thanks to Acid and SDMInst I got my S100 booting CHDK.
This is my first post ever on CHDK. I have the S100 and have installed CHDK on my card and it works great except for one problem, and that is the over-ride function does not seem to be working. I set the camera to M (manual) mode and just to be thorough I set the settings that I would like there just for good measure, even though I will be over-riding them. This is what I have done: power upplayback to get to alt modemenuenhanced photo operations>disable overrides "no"override Av "4.00"override ISO "200"override JPEG quality "Sup.Fin"disable overrides on startup (disabled)exit back into camera mode and the override shows up on the display so I know that it is activated. Great! good to go right? Not so much, when I halfway depress the shutter release the problem manifests itself, the ISO goes from 200 to 320 and the AV goes from F4.0 to F4.0 -x (depending on light it says -1/3 right now.) Why is this not truely manual mode and why is it not overriding? If anyone can help I would love to know what I have missed.Thanks
Started by Brando
Started by mv3830
Started by x3oo
General Help and Assistance on using CHDK stable releases
Started by hiker_jon
Started by ironsting