SX260 HS Porting Thread - page 63 - DryOS Development - CHDK Forum  

SX260 HS Porting Thread

  • 642 Replies
  • 119882 Views
*

Offline msl

  • *****
  • 1269
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: SX260 HS Porting Thread
« Reply #620 on: 04 / August / 2014, 09:17:25 »
Advertisements
All official downloads are available:

CHDK version 1.2
CHDK version 1.3
CHDK-DE:  CHDK-DE links

Re: SX260 HS Porting Thread
« Reply #621 on: 28 / December / 2014, 18:15:43 »
I've been trying all afternoon to do the firmware update process to try out CHDK, but I can't find the firmware update button on the camera anywhere, whether using the play button boot or normal boot. Any tips?

*

Offline reyalp

  • ******
  • 12586
Re: SX260 HS Porting Thread
« Reply #622 on: 28 / December / 2014, 18:50:12 »
I've been trying all afternoon to do the firmware update process to try out CHDK, but I can't find the firmware update button on the camera anywhere, whether using the play button boot or normal boot. Any tips?
The recent discussion in http://chdk.setepontos.com/index.php?topic=12153.0 pretty much covers all the bases.

Note unlike the port discussed there, your cameras does include the PS.FI2 file.
Don't forget what the H stands for.

Re: SX260 HS Porting Thread
« Reply #623 on: 28 / December / 2014, 18:56:43 »
Looks like it could be permissions, as I'm using a Mac. I'll have to chmod them when I get home and see if that fixes it.

Thanks!


*

Offline reyalp

  • ******
  • 12586
Re: SX260 HS Porting Thread
« Reply #624 on: 05 / June / 2020, 14:15:37 »
Can any sx260 owners confirm if the script wheel_left() and wheel_right() functions work on this cam? (ping @koshy)
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 1046
Re: SX260 HS Porting Thread
« Reply #625 on: 05 / June / 2020, 19:39:58 »
Can any sx260 owners confirm if the script wheel_left() and wheel_right() functions work on this cam? (ping @koshy)
pong @reyalp, that triggered an Email, nice.
I've been... well it's a mess these days; anyway, I'm here and the sx260 is at a known shelf place, so tell me what to do with it please :-)
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

*

Offline reyalp

  • ******
  • 12586
Re: SX260 HS Porting Thread
« Reply #626 on: 05 / June / 2020, 20:11:30 »
Can any sx260 owners confirm if the script wheel_left() and wheel_right() functions work on this cam? (ping @koshy)
pong @reyalp, that triggered an Email, nice.
I've been... well it's a mess these days; anyway, I'm here and the sx260 is at a known shelf place, so tell me what to do with it please :-)
Just check if =wheel_left() and =wheel_right() in chdkptp act like using the jogdial on the camera. For example, if the Canon menu is open, they move the highlight up or down, respectively.

Thanks :)
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 1046
Re: SX260 HS Porting Thread
« Reply #627 on: 05 / June / 2020, 20:55:42 »
@reyalp I did what you asked. Connected CHDKPTP to SX260, switched to Rec, went to Menu, set it in the middle of the list.

This:
Code: [Select]
> =wheel_left()
> =wheel_left()
> =wheel_right()
> =wheel_right()
did nothing...
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)


*

Offline reyalp

  • ******
  • 12586
Re: SX260 HS Porting Thread
« Reply #628 on: 05 / June / 2020, 20:59:24 »
@reyalp I did what you asked. Connected CHDKPTP to SX260, switched to Rec, went to Menu, set it in the middle of the list.

This:
Code: [Select]
> =wheel_left()
> =wheel_left()
> =wheel_right()
> =wheel_right()
did nothing...
Thanks. Can you try the following instead:
=post_levent_to_ui("RotateJogDialLeft",2)
=post_levent_to_ui("RotateJogDialRight",2)
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 1046
Re: SX260 HS Porting Thread
« Reply #629 on: 05 / June / 2020, 21:08:45 »
These:
Code: [Select]
> =post_levent_to_ui("RotateJogDialLeft",2)
> =post_levent_to_ui("RotateJogDialRight",2)
work just fine
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

 

Related Topics