SX260 HS Porting Thread - page 63 - DryOS Development - CHDK Forum

SX260 HS Porting Thread

  • 642 Replies
  • 214955 Views
*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: SX260 HS Porting Thread
« Reply #620 on: 04 / August / 2014, 09:17:25 »
Advertisements
All official downloads are available:

CHDK version 1.2
CHDK version 1.3
CHDK-DE:  CHDK-DE links

Re: SX260 HS Porting Thread
« Reply #621 on: 28 / December / 2014, 18:15:43 »
I've been trying all afternoon to do the firmware update process to try out CHDK, but I can't find the firmware update button on the camera anywhere, whether using the play button boot or normal boot. Any tips?

*

Offline reyalp

  • ******
  • 14098
Re: SX260 HS Porting Thread
« Reply #622 on: 28 / December / 2014, 18:50:12 »
I've been trying all afternoon to do the firmware update process to try out CHDK, but I can't find the firmware update button on the camera anywhere, whether using the play button boot or normal boot. Any tips?
The recent discussion in http://chdk.setepontos.com/index.php?topic=12153.0 pretty much covers all the bases.

Note unlike the port discussed there, your cameras does include the PS.FI2 file.
Don't forget what the H stands for.

Re: SX260 HS Porting Thread
« Reply #623 on: 28 / December / 2014, 18:56:43 »
Looks like it could be permissions, as I'm using a Mac. I'll have to chmod them when I get home and see if that fixes it.

Thanks!


*

Offline reyalp

  • ******
  • 14098
Re: SX260 HS Porting Thread
« Reply #624 on: 05 / June / 2020, 14:15:37 »
Can any sx260 owners confirm if the script wheel_left() and wheel_right() functions work on this cam? (ping @koshy)
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 1096
Re: SX260 HS Porting Thread
« Reply #625 on: 05 / June / 2020, 19:39:58 »
Can any sx260 owners confirm if the script wheel_left() and wheel_right() functions work on this cam? (ping @koshy)
pong @reyalp, that triggered an Email, nice.
I've been... well it's a mess these days; anyway, I'm here and the sx260 is at a known shelf place, so tell me what to do with it please :-)
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

*

Offline reyalp

  • ******
  • 14098
Re: SX260 HS Porting Thread
« Reply #626 on: 05 / June / 2020, 20:11:30 »
Can any sx260 owners confirm if the script wheel_left() and wheel_right() functions work on this cam? (ping @koshy)
pong @reyalp, that triggered an Email, nice.
I've been... well it's a mess these days; anyway, I'm here and the sx260 is at a known shelf place, so tell me what to do with it please :-)
Just check if =wheel_left() and =wheel_right() in chdkptp act like using the jogdial on the camera. For example, if the Canon menu is open, they move the highlight up or down, respectively.

Thanks :)
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 1096
Re: SX260 HS Porting Thread
« Reply #627 on: 05 / June / 2020, 20:55:42 »
@reyalp I did what you asked. Connected CHDKPTP to SX260, switched to Rec, went to Menu, set it in the middle of the list.

This:
Code: [Select]
> =wheel_left()
> =wheel_left()
> =wheel_right()
> =wheel_right()
did nothing...
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)


*

Offline reyalp

  • ******
  • 14098
Re: SX260 HS Porting Thread
« Reply #628 on: 05 / June / 2020, 20:59:24 »
@reyalp I did what you asked. Connected CHDKPTP to SX260, switched to Rec, went to Menu, set it in the middle of the list.

This:
Code: [Select]
> =wheel_left()
> =wheel_left()
> =wheel_right()
> =wheel_right()
did nothing...
Thanks. Can you try the following instead:
=post_levent_to_ui("RotateJogDialLeft",2)
=post_levent_to_ui("RotateJogDialRight",2)
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 1096
Re: SX260 HS Porting Thread
« Reply #629 on: 05 / June / 2020, 21:08:45 »
These:
Code: [Select]
> =post_levent_to_ui("RotateJogDialLeft",2)
> =post_levent_to_ui("RotateJogDialRight",2)
work just fine
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal