CHDK for PowerShot G1 X? - page 6 - CHDK Releases - CHDK Forum supplierdeeply
« previous next »
Pages: 1 2 3 4 5 [6] 7 8 9 10 11   Go Down

CHDK for PowerShot G1 X?

  • 101 Replies
  • 44461 Views
*

Offline lapser

  • *****
  • 1093
Re: CHDK for PowerShot G1 X?
« Reply #50 on: 04 / December / 2012, 00:44:02 »
Advertisements
Quote from: waterwingz on 03 / December / 2012, 19:40:22
Quote from: lapser on 03 / December / 2012, 12:26:54
I used the install firmware versions until one works method.
I know you are probably just kidding around here,  but the problem with that method for someone new to CHDK is determining if the camera does not boot CHDK because they are using the wrong firmware version or if they have done something else wrong.
Good point. I had already installed CHDK on the sx260, so I could use it to make a bootable card for the G1X. Then I installed each firmware version in turn, and it worked on the last one (of course). If I only had the G1X and no other camera, I couldn't have done this.

I haven't used ACID, but doesn't it discover the firmware version from a jpg somehow?
Logged
EOS-M3_120f / SX50_100b / SX260_101a / G1X_100g / D20_100b
https://www.youtube.com/user/DrLapser/videos
*

Offline waterwingz

  • ******
  • 12122
    • Waterwingz
Re: CHDK for PowerShot G1 X?
« Reply #51 on: 04 / December / 2012, 19:53:29 »
Quote from: lapser on 04 / December / 2012, 00:44:02
I haven't used ACID, but doesn't it discover the firmware version from a jpg somehow?
Yes - and downloads the appropriate version for you based on that.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline ocean

  • *
  • 4
Re: CHDK for PowerShot G1 X?
« Reply #52 on: 17 / December / 2012, 08:47:27 »
Hello guys!
I just bought a Canon G1X camera a week ago (December 2012).
Before trying to install the CHDK I checked to see what is my camera firmware.
Using the ACID tool I discovered my camera has the firmware version 101a.
This firmware seems to be newer and is not in your list.

I dumped my firmware using the dump script.
I cannot attach the firmware to this message because archived has 4MB.
Please let me know if I can help with this new firmware by uploading it somewhere.

I hope there is somebody there interested and having enough time to deal with the porting of this new firmware version.

Thank you a lot.
Logged
*

Offline waterwingz

  • ******
  • 12122
    • Waterwingz
Re: CHDK for PowerShot G1 X?
« Reply #53 on: 17 / December / 2012, 10:10:50 »
Quote from: ocean on 17 / December / 2012, 08:47:27
I dumped my firmware using the dump script.
I cannot attach the firmware to this message because archived has 4MB.
Please let me know if I can help with this new firmware by uploading it somewhere.
Any upload site will do.   I like http://box.com

Quote
I hope there is somebody there interested and having enough time to deal with the porting of this new firmware version.
Looks like you've already read this but just in case you haven't
link>CHDK FAQ : My camera isn't ported yet
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline lapser

  • *****
  • 1093
Re: CHDK for PowerShot G1 X?
« Reply #54 on: 17 / December / 2012, 23:07:40 »
Quote from: ocean on 17 / December / 2012, 08:47:27
I hope there is somebody there interested and having enough time to deal with the porting of this new firmware version.
philmoz did the orginal  port, so he would be the one to ask. The G1X is the top of the line for CHDK cameras, so I hope he gets you going soon.
Logged
EOS-M3_120f / SX50_100b / SX260_101a / G1X_100g / D20_100b
https://www.youtube.com/user/DrLapser/videos
*

Offline ocean

  • *
  • 4
Re: CHDK for PowerShot G1 X?
« Reply #55 on: 19 / December / 2012, 11:29:48 »
Hello,
Thank you for your quick reply.

The firmware version 1.0.1a dump can be downloaded here:

https://www.box.com/s/xerg9en5m8o8gy4zf8qs
Logged
*

Offline fe50

  • ******
  • 3139
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: CHDK for PowerShot G1 X?
« Reply #56 on: 20 / December / 2012, 04:31:27 »
Hello & welcome, ocean !

Well done, thanks for the dump !
Quote from: fe50 on 20 / December / 2012, 04:29:32
Added the
  • G1X 1.01A
full 16MB dump (dumped with cBasic udumper) by ocean from this forum post to the CHDK P&S FW dumps repository.
Logged
*

Online philmoz

  • *****
  • 3407
    • Photos
Re: CHDK for PowerShot G1 X?
« Reply #57 on: 24 / December / 2012, 01:17:58 »
Quote from: ocean on 19 / December / 2012, 11:29:48
Hello,
Thank you for your quick reply.

The firmware version 1.0.1a dump can be downloaded here:

https://www.box.com/s/xerg9en5m8o8gy4zf8qs


Initial test version attached.
If it boots you should see the splash screen and be able to get into the CHDK menus.

Still and movie overrides not implemented in this version.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline sulhelka

  • *
  • 1
Re: CHDK for PowerShot G1 X?
« Reply #58 on: 27 / December / 2012, 18:04:20 »
Quote from: philmoz on 24 / December / 2012, 01:17:58
Quote from: ocean on 19 / December / 2012, 11:29:48
Hello,
Thank you for your quick reply.

The firmware version 1.0.1a dump can be downloaded here:

https://www.box.com/s/xerg9en5m8o8gy4zf8qs


Initial test version attached.
If it boots you should see the splash screen and be able to get into the CHDK menus.

Still and movie overrides not implemented in this version.

Phil.

Installed with firmware 1.0.1a and worked, I could see the menus and get inside then.

Thanks
Logged
*

Online philmoz

  • *****
  • 3407
    • Photos
Re: CHDK for PowerShot G1 X?
« Reply #59 on: 28 / December / 2012, 17:38:00 »
Quote from: sulhelka on 27 / December / 2012, 18:04:20
Quote from: philmoz on 24 / December / 2012, 01:17:58
Quote from: ocean on 19 / December / 2012, 11:29:48
Hello,
Thank you for your quick reply.

The firmware version 1.0.1a dump can be downloaded here:

https://www.box.com/s/xerg9en5m8o8gy4zf8qs


Initial test version attached.
If it boots you should see the splash screen and be able to get into the CHDK menus.

Still and movie overrides not implemented in this version.

Phil.

Installed with firmware 1.0.1a and worked, I could see the menus and get inside then.

Thanks

Attached is a new version with (hopefully) all functionality enabled.

Please be sure to test exposure overrides including shutter speeds > 60 seconds, and movie quality override.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
Pages: 1 2 3 4 5 [6] 7 8 9 10 11   Go Up
« previous next »
 

Related Topics