CHDK for PowerShot G1 X? - page 2 - CHDK Releases - CHDK Forum

CHDK for PowerShot G1 X?

  • 101 Replies
  • 45205 Views
*

Offline philmoz

  • *****
  • 3427
    • Photos
Re: CHDK for PowerShot G1 X?
« Reply #10 on: 19 / June / 2012, 04:53:42 »
Advertisements
Here is an initial test version for firmware 1.00g.
This has much of the functionality disabled; it is to verify that CHDK can boot and load on this version.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

Re: CHDK for PowerShot G1 X?
« Reply #11 on: 19 / June / 2012, 07:27:02 »
Hi,

Just tested the 100g, it working on my g1x, can boot-up.

Ivan

*

Offline evox

  • *
  • 10
Re: CHDK for PowerShot G1 X?
« Reply #12 on: 20 / June / 2012, 08:25:51 »
I also tried dumping the 1.00g firmware using the instuctions in the chdk wiki, but was never able to get the dumper script to execute.   Leaving for vacation tomorrow, but will probably try again when I have some spare time.
I did it for you :) ...maybe someone will improve the dumping process tutorial, and describe the steps in a single page format. Also a better notice info on how to start it...in play mode then press func button.

Re: Re: CHDK for PowerShot G1 X?
« Reply #13 on: 20 / June / 2012, 09:40:00 »
I did it for you :) ...maybe someone will improve the dumping process tutorial, and describe the steps in a single page format. Also a better notice info on how to start it...in play mode then press func button.
It's a wiki - feel free to be that "someone" and make the changes yourself rather than just waiting for someone else ?
« Last Edit: 20 / June / 2012, 09:52:09 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16


Re: CHDK for PowerShot G1 X?
« Reply #14 on: 20 / June / 2012, 11:26:45 »
I use the on/off button to on the camera, it boot-up the chdk, after that I use the button with symbol like "s" on the top left hand side get into "alt" mode then only I can use the menu to select the function I want.
But when I select the intervalmeter function set the timer it didn't work, it is because of the function still disable?

Thanks
 

*

Offline evox

  • *
  • 10
Re: CHDK for PowerShot G1 X?
« Reply #15 on: 20 / June / 2012, 11:56:45 »
I have tried the 1.00g firmware, it loads correctly, the OSD battery and other info is ok, just a little screen flicker
Also I have tried the intervalometer script but it does not work, then if you try to enter again in CHDK menu you can't.

*

Offline philmoz

  • *****
  • 3427
    • Photos
Re: CHDK for PowerShot G1 X?
« Reply #16 on: 20 / June / 2012, 18:25:32 »
But when I select the intervalmeter function set the timer it didn't work, it is because of the function still disable?
Also I have tried the intervalometer script but it does not work, then if you try to enter again in CHDK menu you can't.

The CHDK image capture task is not in this version so the core CHDK code is not getting notification of the events.

The next test version should have this enabled.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

*

Offline philmoz

  • *****
  • 3427
    • Photos
Re: CHDK for PowerShot G1 X?
« Reply #17 on: 21 / June / 2012, 04:28:08 »
New test version for firmware 1.00g.

This should have all CHDK functions enabled (if it works).

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)


*

Offline evox

  • *
  • 10
Re: CHDK for PowerShot G1 X?
« Reply #18 on: 22 / June / 2012, 07:51:02 »
It works fine now, just the OSD info like the battery should be moved slightly to the right.
Is it possible to make it record video at 30fps in 1080p ? instead of 24fps, and 60fps in 720p ?

*

Offline philmoz

  • *****
  • 3427
    • Photos
Re: CHDK for PowerShot G1 X?
« Reply #19 on: 22 / June / 2012, 07:54:19 »
It works fine now, just the OSD info like the battery should be moved slightly to the right.

Use the 'OSD Layout Editor' in the 'OSD Parameters' menu.

Quote
Is it possible to make it record video at 30fps in 1080p ? instead of 24fps, and 60fps in 720p ?

No.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

 

Related Topics