sx40HS focus to infinity not doing it. - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1] 2 3 4 5 6 ... 9   Go Down

sx40HS focus to infinity not doing it.

  • 83 Replies
  • 31325 Views
*

Offline radioman193

  • ***
  • 148
sx40HS focus to infinity not doing it.
« on: 20 / April / 2012, 17:44:48 »
Advertisements
 i would like to atleast be able to focus on things that i can see with my own eyes..
but the canon sx40HS will not focus to infinity "Properly".


and i can see the trees at the top of the hill and even see the branches and leaves with my eyes
but this is what i get with the camera.

is there a way to get some more long range focus on this thing?
i have done some reading here on the forums and i have seen were the focus was cut back for some reason .......
and have seen it in reading some of the build notes for some of the builds.

the focus looks like its off by 2 or 3 steps.  :(

I like to do some astrophotography but Never could like this.....

Is there a way that this can be Fixed ?

here is a photo that i took at 35x OPTICAL zoom and manual focus to its MAX.

« Last Edit: 20 / April / 2012, 17:51:29 by radioman193 »
Logged
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: sx40HS focus to infinity not doing it.
« Reply #1 on: 20 / April / 2012, 17:56:12 »
Can you provide more information please.

Did you use CHDK to set infinity focus, use manual focus, or let the camera focus?
What was the aperture, shutter speed, and ISO for the image.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline radioman193

  • ***
  • 148
Re: sx40HS focus to infinity not doing it.
« Reply #2 on: 20 / April / 2012, 18:29:57 »
and if i use use CHDK to set infinity focus its the SAME results.
i posted that i use manual focus.

Make = Canon
Model = Canon PowerShot SX40 HS
Orientation = top/left
Date Time = 2012-04-20 05:24:54

[Camera]
Exposure Time = 1/200"
F Number = F5.8
ISO Speed Ratings = 200
Exif Version = 30, 32, 33, 30
Date Time Original = 2012-04-20 05:24:54
Date Time Digitized = 2012-04-20 05:24:54
Shutter Speed Value = 7.66 TV
Aperture Value = 5.06 AV
Exposure Bias Value = ±0EV
Max Aperture Value = F5.78
Metering Mode = Pattern
Flash = Flash did not fire, compulsory flash mode
Focal Length = 150.5mm
Maker Note = 3786 Byte
User Comment =
Flashpix Version = Version 1.0
Color Space = sRGB
Exif Image Width = 4000
Exif Image Height = 2248
Sensing Method = One-chip color area sensor
File Source = DSC
Custom Rendered = Normal process
Exposure Mode = Auto exposure
White Balance = Auto white balance
Digital Zoom Ratio = 1x
Scene Capture Type = Normal
 
« Last Edit: 20 / April / 2012, 18:32:17 by radioman193 »
Logged
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: sx40HS focus to infinity not doing it.
« Reply #3 on: 20 / April / 2012, 19:05:31 »
There looks to be a bit of motion blur in the image, although it might also be heat haze.
Was it a hot day?
How far would you say the distant trees were?

Comparing your image to ones I've taken shows the image to be slightly worse than I would expect; but it may be other factors.

I'd take more images, try and get a higher shutter speed, try a tripod and IS turned off etc.

If astrophotography is what you're interested in you should also try a few night shots on a good tripod with IS off.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline radioman193

  • ***
  • 148
Re: sx40HS focus to infinity not doing it.
« Reply #4 on: 20 / April / 2012, 19:37:28 »
no it was 78 out
I have taken this shot before alot of times and its Always like that
Logged
*

Offline radioman193

  • ***
  • 148
Re: sx40HS focus to infinity not doing it.
« Reply #5 on: 20 / April / 2012, 19:46:28 »
Plus with My EYES i can see the top tree line and branches and leaves on the trees fine but the camera dont.

Plus it was on a tripod and shot with a remote.
and Is is off when i use the tripod....
and its about a half a mile away.
« Last Edit: 20 / April / 2012, 19:56:16 by radioman193 »
Logged
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: sx40HS focus to infinity not doing it.
« Reply #6 on: 20 / April / 2012, 20:37:30 »
Quote from: radioman193 on 20 / April / 2012, 19:46:28
Plus with My EYES i can see the top tree line and branches and leaves on the trees fine but the camera dont.

Is it any different if you let the camera focus rather than using manual focus to infinity.
The max subject distance override you can set in CHDK for the SX40 is over 9km, so perhaps infinity focus is too far out (although it would be ok for star shots).

Another thing that can affect this is if you are shooting through a window or have a filter on the camera.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline radioman193

  • ***
  • 148
Re: sx40HS focus to infinity not doing it.
« Reply #7 on: 20 / April / 2012, 20:41:11 »
i will look into this more tomarrow  but i only shoot outside Never out a window....
Logged
*

Offline radioman193

  • ***
  • 148
Re: sx40HS focus to infinity not doing it.
« Reply #8 on: 21 / April / 2012, 11:58:46 »
you said "perhaps infinity focus is too far out "
 i say its Not far enough..
I went and did some star shots and thay were Not in focus as i could Not get enough focus
and if i step it BACK by one it even gets worse.



and a shot of the moon as a sample
this was AFTER a toutchup






« Last Edit: 21 / April / 2012, 12:09:55 by radioman193 »
Logged
*

Offline radioman193

  • ***
  • 148
Re: sx40HS focus to infinity not doing it.
« Reply #9 on: 21 / April / 2012, 12:20:36 »
this is how it looks MOST of the time..





Logged
Pages: [1] 2 3 4 5 6 ... 9   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal