ELPH 110 HS (IXUS 125 HS) Porting Thread

waterwingz

12067

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #190 on: 14 / June / 2014, 22:26:31 »

Advertisements

Quote from: fabri22 on 14 / June / 2014, 20:58:32

The DISP key doesn't toggle RAW capture mode in <Alt> mode. (on last stable CHDK)

That's because as far as the CHDK for the ixus125 is concerned, there is no DISP key. The ixus125 is one of those cameras where there the is no separate DISP key - the "DOWN" arrow key is used for that purpose. CHDK doesn't handle "virtual" over-mappings very well just assumes there is no DISP key. I think there might have been a thread not too long ago about using the VIDEO button as the DISP key.

Logged

Ported : A1200 SD940 G10 Powershot N G16

fabri22

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #191 on: 16 / June / 2014, 06:55:47 »

Quote from: waterwingz on 14 / June / 2014, 22:26:31

Quote from: fabri22 on 14 / June / 2014, 20:58:32
The DISP key doesn't toggle RAW capture mode in <Alt> mode. (on last stable CHDK)
That's because as far as the CHDK for the ixus125 is concerned, there is no DISP key. The ixus125 is one of those cameras where there the is no separate DISP key - the "DOWN" arrow key is used for that purpose. CHDK doesn't handle "virtual" over-mappings very well just assumes there is no DISP key. I think there might have been a thread not too long ago about using the VIDEO button as the DISP key.

Thanks for reply, waterwingz.
You did suggest in other thread:
"just add
#define CAM_DISP_BUTTON_NAME "Video"
to your platform_camera.h file"

... really i don't know how to

... too newbie.

Would you make it for me?

my CHDK: ixus125_elph110hs-101a-1.2.0-3456-full_ALPHA

« Last Edit: 16 / June / 2014, 07:48:01 by fabri22 »

Logged

IXUS 125 HS (firm. 101a) - IXUS 115 HS (firm. 101c) - IXUS 117 HS (firm. 101a) IR-ized

waterwingz

12067

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #192 on: 16 / June / 2014, 08:22:35 »

Quote from: fabri22 on 16 / June / 2014, 06:55:47

Would you make it for me?

I'll post something a little later tonight. One complication is that doing so will interfere with the option that lets you change the <ALT> key to "Video".

Logged

Ported : A1200 SD940 G10 Powershot N G16

fabri22

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #193 on: 16 / June / 2014, 09:08:19 »

Quote from: waterwingz on 16 / June / 2014, 08:22:35

I'll post something a little later tonight. One complication is that doing so will interfere with the option that lets you change the <ALT> key to "Video".

I'll leave the <ALT> key stable on PLAY button.
Hope that the modded version doesn't exipire.

Logged

IXUS 125 HS (firm. 101a) - IXUS 115 HS (firm. 101c) - IXUS 117 HS (firm. 101a) IR-ized

waterwingz

12067

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #194 on: 16 / June / 2014, 10:27:33 »

Quote from: fabri22 on 16 / June / 2014, 09:08:19

I'll leave the <ALT> key stable on PLAY button. Hope that the modded version doesn't exipire.

I'm leaning towards finding a permanent fix here rather than a "one off" patch for you.

Update : here's a test build > ixus125_elph110hs-101a-1.3.0-3462-full.zip . Its exactly the same trick used with the S100 so if it's good enough there, then it should be good enough here. Try it and let me know how it works ?

« Last Edit: 16 / June / 2014, 19:18:55 by waterwingz »

Logged

Ported : A1200 SD940 G10 Powershot N G16

fabri22

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #195 on: 17 / June / 2014, 10:07:59 »

Quote from: waterwingz on 16 / June / 2014, 10:27:33

Update : here's a test build > ixus125_elph110hs-101a-1.3.0-3462-full.zip . Its exactly the same trick used with the S100 so if it's good enough there, then it should be good enough here. Try it and let me know how it works ?

Thank you, thank you, thank you.
With your patch i can toggle raw finally.
It seems to me that this trick also solves (partially) an Override Subject Distance issue with this porting.
To better explain:
With previous version, when Override SD selected, shooting makes the camera shutting down even if
following the suggested procedure (AFL > Alt mode > UP key > focus value).
Now i can take a shot with Override SD selected without any camera shutdown, but focus doesn't match the choosen value (ie inf.)
But this is another story and I dare not ask to much.

Logged

IXUS 125 HS (firm. 101a) - IXUS 115 HS (firm. 101c) - IXUS 117 HS (firm. 101a) IR-ized

woody88

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #196 on: 01 / August / 2014, 07:05:29 »

greetings everyone,

this is my first post here, so please excuse my noobie question. I have prepared the sd card the way it was described. found my firmware version is 1.01A via camera version application as function/disp button method would not work.

I downloaded the 1.01a Alpha version of the firmware, copied it to the sd card, and was getting all excited to load my firmware. Started the camera with the play button. Alas, there is no "Firm Update" button on my camera. I tried looking through the net, but did not find any relevant post. Am I the only one that could be having this problem? last option under playback is transition, and last option under camera settings is "Reset all".

For the life of me, I cannot locate Firm Update function and was hoping that someone can help on this. Thanks in advance.

« Last Edit: 01 / August / 2014, 07:07:54 by woody88 »

Logged

fabri22

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #197 on: 01 / August / 2014, 10:24:02 »

Same camera here and CHDK works fine.
Try this:
-format your memory card in camera (flag "low level format")
-download CHDK from here
-extract the zip to the root of your memory card
-try again the firmware update
-then you can make the card bootable via CHDK menu

Logged

IXUS 125 HS (firm. 101a) - IXUS 115 HS (firm. 101c) - IXUS 117 HS (firm. 101a) IR-ized

waterwingz

12067

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #198 on: 01 / August / 2014, 11:16:20 »

Quote from: woody88 on 01 / August / 2014, 07:05:29

I downloaded the 1.01a Alpha version of the firmware, copied it to the sd card, and was getting all excited to load my firmware. Started the camera with the play button. Alas, there is no "Firm Update" button on my camera. I tried looking through the net, but did not find any relevant post. Am I the only one that could be having this problem? last option under playback is transition, and last option under camera settings is "Reset all".

For the life of me, I cannot locate Firm Update function and was hoping that someone can help on this. Thanks in advance.

You really are doing this the hard way. The STICK utility will download, format, and install everything for you.

However, if you want to continue with your approach then you need to make sure there is a file called PS.FI2 in the root directory of your SD card for the firmware update method to use. If it is not there, then you will not be able to load CHDK that way.

Logged

Ported : A1200 SD940 G10 Powershot N G16

woody88

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #199 on: 01 / August / 2014, 18:46:43 »

Thanks waterwingz for your reply. I was able to get CHDK loaded. When I cannot locate the Firm update function, I just did it the other way, and copy the folder content entirely to the sd card and boot it off that way, and it ran fine.

But I am interested in what you said about the STICK utility. Can you point me to the right place to give that a try?

Also, I had enabled RAW format shooting on the firmware, but all the pictures came out essentially just a blur. I wonder if there is something wrong with the camera. if I am asking the questions in the wrong thread, please feel free to let me know also. Thanks again.

Logged