ELPH 110 HS (IXUS 125 HS) Porting Thread - page 5 - DryOS Development - CHDK Forum  

ELPH 110 HS (IXUS 125 HS) Porting Thread

  • 246 Replies
  • 90449 Views
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #40 on: 05 / March / 2013, 10:04:01 »
Advertisements
nafraf - Revision 263: /chdk/..../ixus125_elph110hs [+ trunk-2617]
RE:- "SD_READONLY_FLAG" Porting Status
Error:- "Memory Card Locked"
It is a porting error, my guess is that SD_READONLY_FLAG is detected corrected, but there is a bug in ixus125_elph110hs/kbd.c  Please test with "nafraf - Revision 265".
You will also get that error if CHDK fails to load and the camera just proceeds with the normal firmware boot.
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline nafraf

  • *****
  • 1308
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #41 on: 05 / March / 2013, 10:44:24 »
You will also get that error if CHDK fails to load and the camera just proceeds with the normal firmware boot.
I'm assuming that CHDK boots, because Hardware_Hacker reported it in a previous post.  Another tester report (via PM) that he could navigate through CHDK menu but he could not take photos due to "Memory Card Locked" message. It's weird, I have not seen that error before, I'd like to have more details of the bug.

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #42 on: 05 / March / 2013, 11:03:08 »
There have been occasional reports (IIRC) of some i/o bits using inverted logic.   Perhaps the SD_READONLY_FLAG is corrrect but runs inverted from other cameras ?
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline MKR

  • *
  • 11
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #43 on: 05 / March / 2013, 12:01:37 »
I did get the message about the memory card being locked, but I assumed that was normal due to needing to lock the memory card to make it boot.


*

Offline nafraf

  • *****
  • 1308
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #44 on: 05 / March / 2013, 12:10:39 »
I did get the message about the memory card being locked, but I assumed that was normal due to needing to lock the memory card to make it boot.
Is CHDK running? Is it possible to navigate through CHDK menu?

*

Offline MKR

  • *
  • 11
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #45 on: 05 / March / 2013, 12:36:18 »
I was able to navigate through, but it seemed like a lot of things were missing. For example, I didn't see the raw parameters menu. I'll see about running through the three CHDKs again to see which booted and see if I can find out something more.

*

Offline MKR

  • *
  • 11
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #46 on: 05 / March / 2013, 12:43:45 »
Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu. I get a CHDK key cheatsheet if I let it sit long enough.

edit: The menu button brings up the root CHDK menu I expected to see
« Last Edit: 05 / March / 2013, 12:47:00 by MKR »

*

Offline nafraf

  • *****
  • 1308
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #47 on: 05 / March / 2013, 12:48:34 »
Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu.
I'll send you the link to a new version. Lakeroe reported that "Read only" issue was solved with nafraf - Rev 265 :).
What is the firmware version of your camera?


*

Offline MKR

  • *
  • 11
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #48 on: 05 / March / 2013, 12:50:51 »
Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu.
I'll send you the link to a new version. Lakeroe reported that "Read only" issue was solved with nafraf - Rev 265 :).
What is the firmware version of your camera?

101a

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #49 on: 05 / March / 2013, 12:53:09 »
For example, I didn't see the raw parameters menu. I'll see about running through the three CHDKs again to see which booted and see if I can find out something more.
Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu.
Pretty much exactly what you would expect to see & have happen.  Much of the CHDK documentation still describes how things worked with the old 1.0.0 version.

Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics