ELPH 110 HS (IXUS 125 HS) Porting Thread - page 6 - DryOS Development - CHDK Forum supplierdeeply

ELPH 110 HS (IXUS 125 HS) Porting Thread

  • 246 Replies
  • 90448 Views
*

Offline MKR

  • *
  • 11
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #50 on: 05 / March / 2013, 12:53:55 »
Advertisements
For example, I didn't see the raw parameters menu. I'll see about running through the three CHDKs again to see which booted and see if I can find out something more.
Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu.
Pretty much exactly what you would expect to see & have happen.

I haven't used CHDK since getting the new camera, so I forgot what was normal. :)

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #51 on: 07 / March / 2013, 02:54:35 »
"SD_READONLY_FLAG" Porting Status

nafraf - Revision 268: /chdk/..../ixus125-100e_elph110hs [compiled with trunk-2619]

BUILD_NUMBER:- 1.2.2619

There is now NO Error for the "Memory Card Locked" problem.


"SD_READONLY"

    "physw_status[SD_READONLY_IDX] = physw_status[SD_READONLY_IDX] & ~SD_READONLY_FLAG;"


A Quick test with B:\ChdkPtp-r311 [B:\Win.Xp] and B:\PtpCamGui 2v134 [B:\Win.Xp].


Both Ixus 125-100e's work very well, with my custom drivers, in 95meg Ram-Drive "B:\".

I tried very hard, but failed, to make the cameras crash.


Thanks

H-H

Attached Camera logs

Camera #1 .... Ixus 125_100e ROMLOG-LOG #1

Camera #2 .... Ixus 125_100e ROMLOG-LOG #2

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #52 on: 07 / March / 2013, 02:58:53 »
nafraf - Revision 268: /chdk/..../ixus125-100e_elph110hs [compiled with trunk-2619]

BUILD_NUMBER:- 1.2.2619

Not sure about these, see Attached #1 & #2

H-H

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #53 on: 07 / March / 2013, 03:00:37 »
nafraf - Revision 268: /chdk/..../ixus125-100e_elph110hs [compiled with trunk-2619]

BUILD_NUMBER:- 1.2.2619

Not sure about this, see Attached #3

H-H


*

Offline nafraf

  • *****
  • 1308
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #54 on: 07 / March / 2013, 11:22:49 »
Not sure about these, see Attached #1 & #2
#1 fixed in nafraf-Rev 276.
#2 is a difference in "style", same behavior.  Fixed.

Not sure about this, see Attached #3
#3 commented line with error. Fixed.

Thanks, update to nafraf-Rev 276.

Please check the power-up button behavior:
A short tap -> camera turns on in PLAY mode.
Long press -> camera turns on in REC mode.

Some known issues:
* Colors are wrong. If you post a image of palette in REC and PLAY mode would be possible to use LOAD_CUSTOM_COLORS.
* RAW is not working, please test it with Rev 276

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #55 on: 08 / March / 2013, 00:55:37 »
Hi all,

nafraf - Revision 268: /chdk/..../ixus125-100e_elph110hs [compiled with 1-1-2619]
 
Ixus125_elph110hs-100e (dryos, #12865): MEMISOSIZE used: 0x3c03e

A little bit more "Quick" testing, see attached.

With this version the two cameras were very hard to crash.

H-H

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #56 on: 08 / March / 2013, 01:02:52 »
nafraf - Revision 268: /chdk/..../ixus125-100e_elph110hs [compiled with 1-1-2619]
 
Ixus125_elph110hs-100e (dryos, #12865): MEMISOSIZE used: 0x3c03e

Test of B:\PtpCamGui 2v134, see attached log.

H-H


*

Offline nafraf

  • *****
  • 1308
Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #57 on: 08 / March / 2013, 06:00:46 »
@Hardware_Hacker
Modemap table is not complete, I don't have access to ixus125 to test it.

You find instructions of how to fill modemap table here: http://chdk.wikia.com/wiki/Adding_support_for_a_new_camera   section platform/<camera>/shooting.c

Another alternative is to use set_capture_mode_canon script command to identify the modes.


Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #58 on: 08 / March / 2013, 23:12:51 »
Hi All,

@nafraf - Revision 278: /chdk/..../ixus125-100e_elph110hs [Re-compiled, OK, with 1-2-2619-278]

I Noted, but ignored, a Long list of warnings.

Should I be using a newer version of Gcc ?.
 

-=+ Ixus125_elph110hs-100e +=-


Please check the power-up button behavior:-

A short tap -> camera turns on in PLAY mode. [A Quick Test = Ok]

Long press -> camera turns on in REC mode. [A Quick Test = Ok]

Some known issues:-

* Colors are wrong.      CHDK Logo Orange [But, Not yet Tested]
 
If you post a image of palette in REC and PLAY mode would be possible to use LOAD_CUSTOM_COLORS.

= ToDo next post.


* RAW is not working, please test it with Rev 276 [A Quick-Quick, Test = "May Be but not Sure"]


~~~~~~~~~~ ? ~~~~~~~~~~~~~

Attached:- Ixus 125-100e & Digi-5  #4

Someting I previously noted, so It may have been changed, Should the The "125-xxx" Reference:-

#1/ Digi5 Property's [?]

#2/ DryOS Rel 47 [?]

#3/ DryOS Rel 50 [?]

Thanks

H-H

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread
« Reply #59 on: 08 / March / 2013, 23:36:21 »
Not to intrude here, but a bit of attention to the posting conventions of this forum when quoting text would help many of us follow this thread and maybe contribute?
Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics