ELPH 110 HS (IXUS 125 HS) Porting Thread

waterwingz

12140

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #40 on: 05 / March / 2013, 10:04:01 »

Advertisements

Quote from: nafraf on 05 / March / 2013, 09:39:02

Quote from: Hardware_Hacker on 05 / March / 2013, 03:08:21
nafraf - Revision 263: /chdk/..../ixus125_elph110hs [+ trunk-2617]
RE:- "SD_READONLY_FLAG" Porting Status
Error:- "Memory Card Locked"
It is a porting error, my guess is that SD_READONLY_FLAG is detected corrected, but there is a bug in ixus125_elph110hs/kbd.c Please test with "nafraf - Revision 265".

You will also get that error if CHDK fails to load and the camera just proceeds with the normal firmware boot.

Logged

Ported : A1200 SD940 G10 Powershot N G16

nafraf

1308

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #41 on: 05 / March / 2013, 10:44:24 »

Quote from: waterwingz on 05 / March / 2013, 10:04:01

You will also get that error if CHDK fails to load and the camera just proceeds with the normal firmware boot.

I'm assuming that CHDK boots, because Hardware_Hacker reported it in a previous post. Another tester report (via PM) that he could navigate through CHDK menu but he could not take photos due to "Memory Card Locked" message. It's weird, I have not seen that error before, I'd like to have more details of the bug.

Logged

waterwingz

12140

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #42 on: 05 / March / 2013, 11:03:08 »

There have been occasional reports (IIRC) of some i/o bits using inverted logic. Perhaps the SD_READONLY_FLAG is corrrect but runs inverted from other cameras ?

Logged

Ported : A1200 SD940 G10 Powershot N G16

MKR

11

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #43 on: 05 / March / 2013, 12:01:37 »

I did get the message about the memory card being locked, but I assumed that was normal due to needing to lock the memory card to make it boot.

Logged

nafraf

1308

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #44 on: 05 / March / 2013, 12:10:39 »

Quote from: MKR on 05 / March / 2013, 12:01:37

I did get the message about the memory card being locked, but I assumed that was normal due to needing to lock the memory card to make it boot.

Is CHDK running? Is it possible to navigate through CHDK menu?

Logged

MKR

11

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #45 on: 05 / March / 2013, 12:36:18 »

I was able to navigate through, but it seemed like a lot of things were missing. For example, I didn't see the raw parameters menu. I'll see about running through the three CHDKs again to see which booted and see if I can find out something more.

Logged

MKR

11

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #46 on: 05 / March / 2013, 12:43:45 »

Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu. I get a CHDK key cheatsheet if I let it sit long enough.

edit: The menu button brings up the root CHDK menu I expected to see

« Last Edit: 05 / March / 2013, 12:47:00 by MKR »

Logged

nafraf

1308

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #47 on: 05 / March / 2013, 12:48:34 »

Quote from: MKR on 05 / March / 2013, 12:43:45

Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu.

I'll send you the link to a new version. Lakeroe reported that "Read only" issue was solved with nafraf - Rev 265

.
What is the firmware version of your camera?

Logged

MKR

11

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #48 on: 05 / March / 2013, 12:50:51 »

Quote from: nafraf on 05 / March / 2013, 12:48:34

Quote from: MKR on 05 / March / 2013, 12:43:45
Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu.
I'll send you the link to a new version. Lakeroe reported that "Read only" issue was solved with nafraf - Rev 265 .
What is the firmware version of your camera?

101a

Logged

waterwingz

12140

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #49 on: 05 / March / 2013, 12:53:09 »

Quote from: MKR on 05 / March / 2013, 12:36:18

For example, I didn't see the raw parameters menu. I'll see about running through the three CHDKs again to see which booted and see if I can find out something more.

Quote from: MKR on 05 / March / 2013, 12:43:45

Booted with the a version. The play button brings up the <ALT> thing at the bottom, and FUNC. SET brings me straight to the scripts menu. I can't use the Back option to move up--it just closes the menu.

Pretty much exactly what you would expect to see & have happen. Much of the CHDK documentation still describes how things worked with the old 1.0.0 version.

Logged

Ported : A1200 SD940 G10 Powershot N G16