ELPH 110 HS (IXUS 125 HS) Porting Thread

Hardware_Hacker

322

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #100 on: 25 / March / 2013, 03:43:49 »

Advertisements

Hi all,

Source Code @ Trunk2650+ N...Svn305, was added about 30 hours ago, Ixus 125 Ports from nafraf and philmoz.

The "Alpha Ixus 125_100e" version boots Ok.

and runs Ok,

BUT, no other testing was done.

CHDK-SVN AutoBuild Download has now also added the Alpha Ixus 125 Ports.

This is the development version of CHDK which is considered "Unstable"

Complete zips contain additional files like scipts, grids, language files, RBF fonts and curves

Small zips contain the bare DISKBOOT.bin and PS.FIR/PS.FI2

@ http://mighty-hoernsche.de/trunk/

This version boots Ok for "Alpha Ixus 125_100e"

and runs Ok,

The PS.FI2 version also boots Ok for "Alpha Ixus 125_100e"

and runs Ok,

BUT, no other testing was done.

H-H

Logged

nafraf

1308

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #101 on: 28 / March / 2013, 18:37:10 »

Compiled version for IXUS125 100d is in attachment, to load it, it is necessary to use bootable sd card method.

This is a version under development, Firmware update method does not work

Please test it and report.
First test: http://chdk.wikia.com/wiki/Testing

« Last Edit: 02 / May / 2013, 05:00:45 by nafraf »

Logged

slonav58

4

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #102 on: 31 / March / 2013, 06:26:26 »

Quote from: nafraf on 28 / March / 2013, 18:37:10

Compiled version for IXUS125 100d is in attachment, to load it, it is necessary to use bootable sd card method.

This is a version under development, Firmware update method does not work

Please test it and report.
First test: http://chdk.wikia.com/wiki/Testing

llibtst.lua was successful, setmode.lua had three errors. Log files attached.

« Last Edit: 31 / March / 2013, 06:29:59 by slonav58 »

Logged

slonav58

4

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #103 on: 31 / March / 2013, 06:29:11 »

Trying log files again - think I ejected the card before posting message.

llibtst.log (4.54 kB - downloaded 34 times.)

setmode.log (2.21 kB - downloaded 36 times.)

Logged

nafraf

1308

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #104 on: 31 / March / 2013, 07:56:44 »

Quote from: slonav58 on 31 / March / 2013, 06:26:26

llibtst.lua was successful, setmode.lua had three errors. Log files attached.

Thanks for testing. modemap table has not been fully ported for this camera model.
Please try to use chdkptp to run set_capture_mode_canon and see what happens with modes that failed running set_mode.lua
check reply 69 of this thread.

Logged

DynamechGT

1

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #105 on: 13 / April / 2013, 19:38:37 »

Hi all,

I'd like to help with this port for FW 101a. I have very little coding skills (matlab,arduino/processing). I'm trying to get set up like H-H so that I can give good feedback to help this along. I'll be receiving an AC power supply in a few days so I won't be time-limited to battery life for testing purposes. I've run ACID and WICK and have gotten the recommended, auto-downloaded "ixus125_elph110hs-101a" stable (alpha?) to run on the camera. It boots past the intro/version screen very fast. The normal OSD is overlapped by the chdk osd and the menu's bug out a little with the AF box wandering around the screen. I haven't tried any scripts yet and I just got chdkptp to show the camera display but can't really make it do anything (picture attached (if I can upload yet)). I've looked at the "adding support for a new camera" page and the testing page but this is all new to me.

nafraf, I hope you and the others are still willing to work on this with me (and guide me a little along the way).

-DGT

chdkprogress0001.jpg (189.35 kB, 1366x768 - viewed 97 times.)

Logged

nafraf

1308

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #106 on: 13 / April / 2013, 20:58:38 »

Hi, welcome to forum.

Quote from: DynamechGT on 13 / April / 2013, 19:38:37

I've run ACID and WICK and have gotten the recommended, auto-downloaded "ixus125_elph110hs-101a" stable (alpha?) to run on the camera. It boots past the intro/version screen very fast. The normal OSD is overlapped by the chdk osd and the menu's bug out a little with the AF box wandering around the screen.

Some comments about OSD and AF box here: http://chdk.setepontos.com/index.php?topic=8450.msg96390#msg96390

Basic tests were done to the port, if you want to run them again: chdk.wikia.com/wiki/Testing
LED indexes for led_table are not verified. Comments about LED tests are available here

Quote

I haven't tried any scripts yet and I just got chdkptp to show the camera display but can't really make it do anything (picture attached (if I can upload yet)). I've looked at the "adding support for a new camera" page and the testing page but this is all new to me.

Using chdkptp, you press on REC button to go to shoot mode, after that you can use shoot button to take photos.

Logged

babybug

1

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #107 on: 22 / April / 2013, 13:28:46 »

Hi all, I'm babybug, a newbie !

I've been followed this thread for somtimes, waiting for the CHDK 100d for my Elph 110 HS, but it's been nearly a year without completion! I've tried other version (100e and 101a) on my camera. But after click OK on the Firmware Update screen, the camera just goes black, no CHDK logo appears, so I guess they won't work!

Any advice on what I should do will be greatly appreciated. Thanks!
By the way, is the ALT key for Elph 110 HS is the DISP button?

UPDATE: Please disregard my above request, I've found nafraf's compiled version 100d (on the previous page) and run it successfully on my camera. Thank you nafraf.
Also, the ALT key is the PLAY button, not the DISP

« Last Edit: 22 / April / 2013, 19:54:37 by babybug »

Logged