Help with IXUS 220 HS (ELPH300HS) - PTP - page 3 - General Help and Assistance on using CHDK stable releases

SanderC

2

Re: Help with IXUS 220 HS (ELPH300HS) - PTP

« Reply #20 on: 22 / November / 2012, 17:39:05 »

Advertisements

I managed to boot CHDK on my IXUS 220HS (works great!), i installed libusb and ptpcamgui, but it doesn't really work.
console displays
>> reset
>> reset
>> reset
>> reset
>> reset
, and so on
and it waits for camera constantly, i thought i was so close to get it working on, but i falied, please do help, i'm a dummy!

Logged

reyalp

14003

Re: Help with IXUS 220 HS (ELPH300HS) - PTP

« Reply #21 on: 22 / November / 2012, 18:05:10 »

Quote from: SanderC on 22 / November / 2012, 17:39:05

I managed to boot CHDK on my IXUS 220HS (works great!), i installed libusb and ptpcamgui, but it doesn't really work.
console displays
>> reset
>> reset
>> reset
>> reset
>> reset
, and so on
and it waits for camera constantly, i thought i was so close to get it working on, but i falied, please do help, i'm a dummy!

Do you "USB remote" enabled in chdk menu by any chance? This setting must be off to use PTP (this is confusing, but the USB remote is something different...)

Logged

Don't forget what the H stands for.

SanderC

2

Re: Help with IXUS 220 HS (ELPH300HS) - PTP

« Reply #22 on: 22 / November / 2012, 19:09:59 »

Thanks a bunch!

It works! It works!

I guess I was so excited CHDK was working, that I started to fiddle in menu, then I actually found out that remote USB was something different i was expecting (ptp was), and forgot to change it.

Logged

andrew.stephens.754365

461

Re: Help with IXUS 220 HS (ELPH300HS) - PTP

« Reply #23 on: 07 / November / 2013, 18:12:39 »

Quote from: reyalp on 01 / June / 2012, 15:53:47

You definitely cannot do this kind of thing with a hub, a distinct USB protocol connection to each device is required.

Does this mean that multicam.lua function mc:connect() cannot be used to connect multiple hub connected cameras ? (or has something changed in the meantime). Thanks.

Logged

reyalp

14003

Re: Help with IXUS 220 HS (ELPH300HS) - PTP

« Reply #24 on: 07 / November / 2013, 21:34:34 »

Quote from: andrew.stephens.754365 on 07 / November / 2013, 18:12:39

Does this mean that multicam.lua function mc:connect() cannot be used to connect multiple hub connected cameras ?

No, it means nothing of the sort. That post was written to answer a specific question. If you read the question, the answer should make sense.

Hubs are completely transparent to the USB protocol connection chdkptp uses, just like any other regular USB device it doesn't know or care if they are present.

Logged

Don't forget what the H stands for.

andrew.stephens.754365

461

Re: Help with IXUS 220 HS (ELPH300HS) - PTP

« Reply #25 on: 08 / November / 2013, 03:24:37 »

Quote from: reyalp on 07 / November / 2013, 21:34:34

No, it means nothing of the sort.

Good. Thanks [as usual] for the clarification.

Logged