Auto power on, auto execution & auto shut off sequence? - page 2 - Feature Requests - CHDK Forum
« previous next »
Pages: 1 [2]   Go Down

Auto power on, auto execution & auto shut off sequence?

  • 12 Replies
  • 16208 Views
*

Offline GrAnd

  • ****
  • 916
  • [A610, S3IS]
    • CHDK
Re: Auto power on, auto execution & auto shut off sequence?
« Reply #10 on: 20 / March / 2008, 17:05:13 »
Advertisements
Quote from: fudgey on 20 / March / 2008, 16:37:37
Of course it's still not quite an universal solution for CHDK control since you need specific hardware to have control over port power... making it a lot like any of the gadzillion other possible custom hacks or existing products you can use to pimp your PC to control something as ridiculously easy as a enabling/disabling a tiny 5 V power source

AFAIR, the LPT (parallel) port has about 5V on its pins if they are set to logical "1". This interface is much easier to control.
Logged
CHDK Developer.
*

Offline quietschi

  • ***
  • 116
  • Ixus70 102a
Re: Auto power on, auto execution & auto shut off sequence?
« Reply #11 on: 21 / March / 2008, 03:44:37 »
Quote from: GrAnd on 20 / March / 2008, 17:05:13
AFAIR, the LPT (parallel) port has about 5V on its pins if they are set to logical "1". This interface is much easier to control.
On my test I only get about 3,35V Power on LPT Port (both Laptop and Pc), that is not enough for my Ixus70. So I need a dc/dc converter to get more Volts. btw tested also on a S3IS the multi remote button script and there it works.

cheers quietschi
Logged
*

Offline fudgey

  • *****
  • 1705
  • a570is
Re: Auto power on, auto execution & auto shut off sequence?
« Reply #12 on: 21 / March / 2008, 07:10:37 »
The LPT port is a bit obsolete nowadays, but it indeed used to be a really easy way to interface to PC's. Unfortunately you can only draw a very small amount of current from the parallel port and the voltage will drop below 5 V when loaded. There may be computers with more powerful ports but you won't know until you try.

I'm not sure how much current a typical Canon camera will need to it's USB to trigger cable detect. Typically you can't draw more than a few milliamps from shorted LPT pins; enough to drive a LED but not enough to destroy one.

Combining current from several pins using schottky diodes might be worth a try, although I'd start worrying about port driver power dissipation as it probably wasn't designed for this purpose (i.e. you might fry your parallel port, be warned).

You can get slightly more current out of a RS-232 serial port (also kind of obsolete), but you'll need to limit the voltages as officially the levels are more than 5V.


But anyway, for either port... once you manage to toggle the voltage on any pin by software, you can of course use it to switch a slightly more powerful external power supply (like the voltage from your USB port or a lithium battery many of us use for remote shutters) to the USB port.
Logged
Pages: 1 [2]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal