Does this mean you won't fix it?
For some reason the forum doesn't point the 1st link to the right location.
Search for "phase" if you want more.
If in the very unlikely event I can successfully eliminate the lens, then I think the results may merit a wiki page, and I will approach you on how to do it and put everything in a concise reader-friendly format.
Because I will be rebooting the camera due to memory exhaustion, there could be an alternative that involves shutdown and PUP so the counter is preserved. When the S50 is connected to a power adapter and a USB port, and is in a PDN state, the USB is powered but asleep. If I start RemoteCapture, then it wakes up the camera and connects. Is something like this possible you think on the S90? Of course I cannot test this function on the S90 with RemoteCapture because it is not supported. Any possibilities of wake-up detection?
This is interesting ... I don't know how USB works at the low level but could there be a signal, script command that operates locally, I can issue via CHDKPTP to do that?
But for other users in your community CHDK menu access may be useful if they are setting up a system like I am describing in the other thread.
Started by smilem General Help and Assistance on using CHDK stable releases
Started by SticK « 1 2 ... 70 71 » Creative Uses of CHDK
Started by SticK CHDK Releases
Started by andrew.stephens.754365 General Help and Assistance on using CHDK stable releases
Started by reyalp RAW Shooting and Processing