Not in the case of the S50: it wakes up when I start RemoteCapture, and shuts down when I exit RemoteCapture ... so it means camera end USB controller must be in a sleep mode of some sort when cameara is OFF.
But by the harsh way you reacted to my question, the only thing I can conclude is you don't know.
Per discussion way back here: http://chdk.setepontos.com/index.php?topic=8613.msg90170#msg90170 the S90 uses date folder naming, but CHDK doesn't implement the appropriate to recognize this. I finally got a chance to look into correcting this. If you can test it, just let me know what firmware version you'd want a build for.This would help improve CHDK, and also allow you to use the new function described here: http://chdk.setepontos.com/index.php?topic=8851.msg92341#msg92341 to get the full path to the last shot image, without messing around with listdir etc.
2226-reyalp-test1Please keep in mind that the LKW version I use is 2163 test 1.
>> I set DNG ON>> The OSD is normal -- but -- Canon RAW ICON still UP !!!
>> After a delay of many seconds, then I finally get "DNG Disabled", but it scrolls down screen. Fig 1.
It could be related to the delay for the "DNG Disabled" message. AFAIK, 2163-test1 is faster.
BTW, I don't know how to get rid of the EV:0 message // it's been there since some earlier tests you had asked for. How do I get rid of it?
Started by smilem General Help and Assistance on using CHDK stable releases
Started by SticK « 1 2 ... 70 71 » Creative Uses of CHDK
Started by SticK CHDK Releases
Started by andrew.stephens.754365 General Help and Assistance on using CHDK stable releases
Started by reyalp RAW Shooting and Processing