- Toggle RAW - page 2 - Hello, I'm a NEWBIE - HELP!! (Newbies assistance, User Guides and thank you notes) - CHDK Forum

- Toggle RAW

  • 13 Replies
  • 4514 Views
*

Offline reyalp

  • ******
  • 14121
Re: - Toggle RAW
« Reply #10 on: 10 / September / 2012, 00:28:39 »
Advertisements
But this is not a huge deal. I'm just learning this and was curious about that shortcut. It's not worth spending a lot of time on when there must be higher priorities.
Since the developers don't have most of the cameras, it's good to try to fix stuff when we have someone to test.

Here's a build for 100b with CAM_HAS_ERASE_BUTTON turned off. Disp button should now toggle raw on/off.
Don't forget what the H stands for.

Re: - Toggle RAW
« Reply #11 on: 10 / September / 2012, 01:13:42 »
I'm a bit wary about trying this because the [DISP] button is the way I get to the Main Menu.

If that turns in to a short cut for toggling RAW, how will I activate the Main Menu?

I have another problem: Some of the "Extra Photo Options" do not stick through a restart.

If I set Override Shutter Speed to 1/125 with a Value Factor of 1, that works until I restart the camera. When I restart the Value Factor gets reset to "Off". Same with Override ISO Value. When I restart the camera, the Value Factor reverts to "Off".

*

Offline reyalp

  • ******
  • 14121
Re: - Toggle RAW
« Reply #12 on: 10 / September / 2012, 01:30:30 »
I'm a bit wary about trying this because the [DISP] button is the way I get to the Main Menu.
This is strange, the "menu" button should open the menu...

Ok it appears menu and disp are reversed in the key map for some reason (if the sigfinder is to be believed).

So "disp" would continue to open the menu, and "menu" should be the raw shortcut.

But... the keymap does have an entry for erase... I wonder if this is the face button ?
Quote
I have another problem: Some of the "Extra Photo Options" do not stick through a restart.

If I set Override Shutter Speed to 1/125 with a Value Factor of 1, that works until I restart the camera. When I restart the Value Factor gets reset to "Off". Same with Override ISO Value. When I restart the camera, the Value Factor reverts to "Off".
uncheck "Clear override values@start"
Don't forget what the H stands for.

Re: - Toggle RAW
« Reply #13 on: 10 / September / 2012, 01:50:45 »
Forgive my ignorance, but I just started using this yesterday.

Indeed, this mostly worked: uncheck "Clear override values@start" (but, see below)

The Face button toggles RAW.

The Menu button toggles Subject Distance.

Unfortunately, the Value Factor for Subject Distance always reverts to "1", even with "Clear override values@start" unchecked.





 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal