make PLATFORM=a3400 PLATFORMSUB=101a firzipsubcomplete
what can I do to debug? Do you have an a3400is where this does work?
Note that also I haven't been able to get the firmware info to show up, nor with ver.req or vers.req, or either of those with card locked or unlocked. That should be Func+Disp right? Keep Func pressed, then press Disp and it shows?
I found an error in boot.c.
@gtoonstraI found an error in boot.c. Please update files from my personal svn, compile and test again.
This time it's different and the behavior for play button or normal power on button looks 100% similar. On power on, the green LED blinks 6 times, then a short pause, then another blink and the screen shows "No Image". The 6 blink period seems regular, but it's slightly irregular especially between the 4-6th blink. It's about half a second.
Quote from: gtoonstra on 18 / October / 2012, 10:44:29...and the screen shows "No Image". The 6 blink period seems regular, but it's slightly irregular especially between the 4-6th blink. It's about half a second."No image" appears because there is no photos in your sd-card Does camera crash after booting?Have you seen the CHDK logo? Some functions are disabled, some it could take some seconds to appear. What happens if you press the ALT button [>]?
...and the screen shows "No Image". The 6 blink period seems regular, but it's slightly irregular especially between the 4-6th blink. It's about half a second.
Ok. I put a photo in there and it's showing up. Note that behavior for normal powerup and > button is the same, so it seems to go to photo demo in both cases. Lens does not extend on normal powerup.
LED's are as described in all cases, including normal power up.
Started by tobyjones8 « 1 2 » Firmware Dumping
Started by milos.karalic General Help and Assistance on using CHDK stable releases
Started by timgor General Discussion and Assistance
Started by n1n0 General Discussion and Assistance
Started by jbruchon RAW Shooting and Processing