Ubasic :Unk stat ,with motion detection - page 2 - General Help and Assistance on using CHDK stable releases - CHDK Forum supplierdeeply

Ubasic :Unk stat ,with motion detection

  • 17 Replies
  • 2384 Views
Re: Ubasic :Unk stat ,with motion detection
« Reply #10 on: 24 / February / 2013, 11:17:23 »
Advertisements
I've found This on web
WOW!  That's over six years old.  No wonder it does not work. 

Where is the world did you find that ?  http://thominetweb.free.fr/benjamin/firmCHDKA710IS_benjiPack.zip ?

Please download the current release from here :  http://mighty-hoernsche.de/
« Last Edit: 24 / February / 2013, 11:25:30 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Ubasic :Unk stat ,with motion detection
« Reply #11 on: 24 / February / 2013, 11:38:05 »
OOOPS ! I was really in the dark side of the web!!
it's perfect!
motion runs !
now I'm going to test all the scripts

thank you for your Help!
 merci beaucoup! au plaisir de se recontacter un jour
pasco

Re: Ubasic :Unk stat ,with motion detection
« Reply #12 on: 24 / February / 2013, 11:48:58 »
De rien!
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Ubasic :Unk stat ,with motion detection
« Reply #13 on: 27 / February / 2013, 09:19:18 »
Hello
 :( I'm already on return
Now, I know how to change the script in chdk (  motion to intreval and to lightning ..).but how to get off !

because ,now  I want to take pictures in Raw but it's allways the last script which is in memory!

is there someone who can tell me ?

si vous preferez me répondre en  français moi ,cela me va !!


Re: Ubasic :Unk stat ,with motion detection
« Reply #14 on: 27 / February / 2013, 09:44:07 »
because ,now  I want to take pictures in Raw but it's allways the last script which is in memory!
Taking pictures in RAW is an built-in ability for CHDK.   You do not need to use a script. 

When you are in <ALT> mode,  use the press the Menu key to go to the CHDK menus and select the RAW menu.  The first menu item is used to tell CHDK to take RAW images.  You will probably want to enable DNG mode in the menu as well - its easier to handle DNG image on your PC than RAW images.

Once you have enable RAW image,  CHDK will save a RAW file to your memory card each time you take a picture (the JPEG image will also be saved by the Canon firmware so you get two files).

Quote
si vous preferez me répondre en  français moi ,cela me va !!
Malheureusement, si je tente de décrire la technologie en français, il sera probablement plus difficile à comprendre que si je vous répondre en anglais.
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Ubasic :Unk stat ,with motion detection
« Reply #15 on: 27 / February / 2013, 10:21:46 »
I
Thank you for your answer

I can't take a picture in RAW because the last script I used is still working and I don't how to stop it !

I try to turn off my camera but noways!
allways the last script in memory

What must I do to "clear"?

I hope you understand what I mean !

Re: Ubasic :Unk stat ,with motion detection
« Reply #16 on: 27 / February / 2013, 10:34:39 »
I can't take a picture in RAW because the last script I used is still working and I don't how to stop it !
I think I understand now.   

When you are in <ALT> mode, pressing the shutter button does not take a picture - it starts the currently loaded script.   If you want to take a picture,  simply exit <ALT> mode and then press the shutter button.   If you have RAW enabled,  CHDK will save a RAW image for you even though you are not in <ALT> mode.

The same things works when you use exposure overrides.   You have to set them up with the CHDK menus in <ALT> mode,  but they are active when you are not in <ALT> mode and doing normal shooting.

Ported :   A1200    SD940   G10    Powershot N    G16

Re: Ubasic :Unk stat ,with motion detection
« Reply #17 on: 27 / February / 2013, 11:03:21 »
ok !!
that's the reason why! and one more time you'r wright!

merci encore
et passe une bonne soirée
Pascal  :)



 

Related Topics